DataSheet.es    


PDF 2SA1145 Data sheet ( Hoja de datos )

Número de pieza 2SA1145
Descripción TRANSISTOR (AUDIO FREQUENCY AMPLIFIER APPLICATIONS)
Fabricantes Toshiba Semiconductor 
Logotipo Toshiba Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de 2SA1145 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! 2SA1145 Hoja de datos, Descripción, Manual

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)
2SA1145
Audio Frequency Amplifier Applications
Complementary to 2SC2705.
Small Collector Output Capacitance: Cob = 2.5 pF (typ.)
High Transition Frequency: fT = 200 MHz (typ.)
2SA1145
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
150
V
Collector-emitter voltage
VCEO
150
V
Emitter-base voltage
VEBO 5 V
Collector current
IC 50 mA
Base current
IB 5 mA
Collector power dissipation
PC 800 mW
Junction temperature
Storage temperature range
Tj 150 °C
Tstg
55 to 150
°C
JEDEC
JEITA
TO-92MOD
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
TOSHIBA
2-5J1A
Weight: 0.36 g (typ.)
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2006-11-09

1 page




2SA1145 pdf
2SA1145
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-09

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet 2SA1145.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
2SA1141PNP / NPN TransistorETC
ETC
2SA1141SILICON POWER TRANSISTORSavantIC
SavantIC
2SA1141POWER TRANSISTORInchange Semiconductor
Inchange Semiconductor
2SA1141Trans GP BJT PNP 150V 0.05A 3-Pin TO-92 ModNew Jersey Semiconductor
New Jersey Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar