|
|
PDF SS539 Data sheet ( Hoja de datos )
| Número de pieza | SS539 | |
| Descripción | Bipolar Hall-Effect Position Sensor | |
| Fabricantes | SEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SS539 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
SS539
Bipolar Hall-Effect Position Sensor
Packages
3 pin SOT23 (suffix SO)
3 pin SIP (suffix UA)
Features and Benefits
– 4.5V to 24V Operation
– -40℃ to 150℃ Superior temperature operation
– Bipolar technology
– Open-collector 25 mA output
– Reverse battery protection
– Solid-state reliability
– Resistant to physical stress
– Small Size-SOT23 3L and SIP 3L
– Activate with small, commercially available
Permanent magnets
Functional Block Diagram
Application Examples
–
–
–
–
–
www.DataSheet.net/
–
–
Automotive, Consumer and Industrial
Solid-state switch
Brushless DC motor commutation
Speed measurement
Angular position detection
Revolution counting
Proximity detection
General Description
SIP Package
Pin 1 – VDD
Pin 2 – GND
Pin 3 – OUT
SOT Package
Pin 1 – VDD
Pin 2 – OUT
Pin 3 – GND
The SS539 is an integrated Hall effect latched sensor
designed for electronic commutation of brush-less DC
motor applications. The device integrates a voltage
regulator, reverse battery protection diode, Hall sensor
with dynamic offset cancellation system, temperature
compensation circuitry, small signal amplifier, Schmitt
trigger and an open-collector output to sink up to 25 mA
These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate
continuously over extended temperatures to +150℃, and are more stable with both temperature and supply voltage
changes. If a magnetic flux density larger than threshold Bop, Output is turned on (low). The output state is held until a
magnetic flux density reversal falls below BRP, causing Output to be turned off (high).
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in DC
motor applications.
The device is delivered in a Small Outline Transistor (SOT) or in a Plastic Single In Line ( SIP 3L flat). Both 3-lead
packages are RoHS compliant.
1 V2.10 May 1, 2012
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page  
Package SOT, 3-Pin SOT-23:
SS539
Bipolar Hall-Effect Position Sensor
SOT-23 Package Hall Location:
www.DataSheet.net/
Ordering Information
Part No.
SS539ESOT
SS539EUA
SS539KSOT
SS539KUA
SS539LSOT
SS539LUA
Pb-free
YES
YES
YES
YES
YES
YES
Temperature Code
-40°C to 85°C
-40°C to 85°C
-40°C to125°C
-40°C to125°C
-40°C to 150°C
-40°C to 150°C
Package Code
SOT-23
TO-92
SOT-23
TO-92
SOT-23
TO-92
Packing
7-in. reel, 3000 pieces/reel
Bulk, 1000 pieces/bag
7-in. reel, 3000 pieces/reel
Bulk, 1000 pieces/bag
7-in. reel, 3000 pieces/reel
Bulk, 1000 pieces/bag
5 V2.10 May 1, 2012
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SS539.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SS53 | (SS52 - SS510) SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS |  HY ELECTRONIC |
| SS53 | (SS52 - SS520) Surface Mount Schottky Barrier Rectifiers |  Luguang Electronic |
| SS53 | (SS52 - SS515) 5.0 AMP. SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS |  Thinki Semiconductor |
| SS53 | 5.0A Surface Mount Schottky Barrier |  WEJ |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |