|
|
PDF SF2069A-1 Data sheet ( Hoja de datos )
| Número de pieza | SF2069A-1 | |
| Descripción | SAW Filter | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF2069A-1 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
• Low Insertion Loss
• Hermetic 19 x 6.5 mm Surface-mount Case
• Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max. Soldering Profile
Value
Units
+10 dBm
30 VDC
-40 to +150
°C
260°C for 30 s
SF2069A-1
96.00 MHz
SAW Filter
Electrical Characteristics
Characteristic
Nominal Center Frequency ( @ 25°C )
Minimum Insertion Loss Attenuation
Passband
Amplitude Ripple (p-p)
Group Delay Ripple
Relative Attenuation (relative to αmin)
Operating Temperature
Impedance Matching to 50 Ω unbalanced
Case Style
Lid Symbolization (YY = year, WW = week)
SMP-75
Sym
fO
αmin ≤ 1dB , B1dB
±2.40MHz
±2.40MHz
Notes
1
Min
95.9
4.3
Typ
96.00
14
5.0
0.8
80
Max
96.1
16
1.5
125
40 to 87 MHz
43 48
111 to 150 MHz
50 55
TA 1
-40
+85
www.DataSheet.net/
External L-C
SMP-75 19 x 6.5 mm Nominal Footprint
RFM SF2069A-1 YYWW
Units
MHz
dB
MHz
dB
ns
dB
dB
°C
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 W and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port
2, so that the filter must always be installed in one direction per the circuit design.
7. US and international patents may apply.
www.RFM.com E-mail: [email protected]
©2008 by RF Monolithics, Inc.
Page 1 of 2
SF2069A-1 - 6/26/08
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SF2069A-1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF2069A-1 | SAW Filter | RF Monolithics |
| SF2069A-2 | SAW Filter | RF Monolithics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |