|
|
Número de pieza | SF2064A | |
Descripción | SAW Filter | |
Fabricantes | RF Monolithics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SF2064A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! • Excellent Size-to-Performance Ratio
• Hermetic 13.3 x 6.5 mm Surface-mount Case
• Complies with Directive 2002/95/EC (RoHS) Pb
SF2064A
156 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max. Soldering Profile
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SMP-53
Electrical Characteristics
Characteristic
Nominal Center Frequency
Insertion Loss
CPK>1.33
Passband
-1dB Pass Bandwidth Definition
-3dB Pass Bandwidth Definition
-40dB Pass Bandwidth Definition
Amplitude Ripple
Stopband Rejection 0~110MHz 250MHz~1GHz
Group Delay Variation (Pass Bandwidth)
Absolute Delay at fO
Temperature Coefficient of Frequency
Source Impedance
Input VSWR
Output VSWR
Operating Temperature Range
Sym
fC
BW1
BW3
BW40
Notes
1
www.DataSheet.net/
TA
Min
10
10.6
45
-40
Typ
156.000
15
10.8
11
13.15
1
55
30
1.13
-35
50
1.1
1.7
Max
18
15
2
100
1.5
-40
+85
Impedance Matching to 50Ω Unbalanced
Case Style
Lid Symbolization (YY = year, WW = week)
External L-C
SMP-53 13.3 x 6.5 mm Nominal Footprint
RFM SF2064A YYWW
Units
MHz
dB
MHz
dBp-p
dB
Nsp-p
usec
ppm/°C
ohm
°C
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with
filter soldered to the specified demonstration board with impedance matching to 50 Ω and
measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center
frequency, fc.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. US and international patents may apply.
5. Electrostatic Sensitive Device. Observe precautions for handling.
Electrical Connections
Connection
Port 1 Hot
Port 1 Gnd Return
Port 2 Hot
Port 2 Gnd Return
Case Ground
Terminals
11
12
5
6
All others
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2064A-090707
Page 1 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page 156.0 MHz
SAW Filter
COMPONENT ORIENTATION and DIMENSIONS
1.5 mm +0.1
-0.0
PIN #1
W
(CARRIER TAPE SIZE)
4.0 mm ±0.1
1.5 mm +0.3
-0.0
AO
USER DIRECTION OF FEED
2.0 mm ±0.1
1.75 mm ±0.1
7.5 mm ±0.1
BO
P
(PITCH)
COVER TAPE SIZE
2.15 mm ±0.2
www.DataSheet.net/
COVER TAPE
KO
0.32 mm ±0.3
Ao
Bo
Ko
Pitch
W
Carrier Tape Dimensions
7.55 mm
9.59 mm
2.30 mm
12.0 mm
16.0 mm
±0.1
±0.1
±0.1
±0.1
±0.3
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2064A-9/7/07
Page 5 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SF2064A.PDF ] |
Número de pieza | Descripción | Fabricantes |
SF2064A | SAW Filter | RF Monolithics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |