|
|
PDF SF2060B-1 Data sheet ( Hoja de datos )
| Número de pieza | SF2060B-1 | |
| Descripción | SAW Filter | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF2060B-1 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
® SF2060B-1
• Designed for SDARS Receiver IF Application
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
115.18 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Temperature
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SMP-03-S
Electrical Characteristics
Characteristic
Center Frequency (Fc variation must also be accounted for with an extra ±94
kHz due to crystal variation ±40 ppm at the LO frequency)
Insertion Loss (all BW specifications are a function of FC variation)
Amplitude Ripple (p-p) between
(Fc-6.250 MHz to Fc-4.3925 MHz)
Amplitude Ripple (p-p) between
(Fc-4.3925 MHz to Fc-2.535 MHz)
Amplitude Ripple (p-p) between
(Fc-2.535 MHz to Fc-0.025 MHz)
Amplitude Ripple (p-p) between
(Fc+0.025 MHz to Fc+2.535 MHz)
Amplitude Ripple (p-p) between
(Fc+2.5350 MHz to Fc+4.3925 MHz)
Amplitude Ripple (p-p) between
(Fc+4.3925 MHz to Fc+6.250 MHz)
Pass Bandwidth of -1.5 dB
Pass Bandwidth of -3 dB
www.DataSheet.net/
Low side Attenuation
Fc < (Fc -16.5 MHz)
Low side Attenuation between:
(Fc -16.5 MHz)....(Fc -10.5 MHz)
High side Attenuation between: (Fc +9.0 MHz)....(Fc +16.5 MHz) (-15~85°C)
High side Attenuation between: (Fc +9.0 MHz)....(Fc +16.5 MHz) (-40~-15°C)
High side Attenuation
Fc > (Fc +16.5 MHz)
Temperature Coefficient of Frequency
Delay Ripple (p-p) between
(Fc -6.250 MHz to Fc-4.3925 MHz) SAT1A
(Fc -4.3925 MHz to Fc-2.535 MHz) SAT2A
(Fc -2.535 MHz to Fc-0.025 MHz) TERA
(Fc +0.025 MHz to Fc+2.535 MHz) TERB
(Fc +2.535 MHz to Fc+4.3925 MHz) SAT2B
(Fc +4.3925 MHz to Fc+6.25 MHz) SAT1B
Operating Temperature Range
Differential Input and Output Impedance
Case Style
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Sym
fC
TA
Notes
Min
Typ Max Units
1
115.18
MHz
14 16.2 dB
1.65
1.5
1.5
dB
1.6
1.5
1.5
13.5
MHz
14.5
34
32
24 dB
18
33
-18 ppm/°C
150
180
120
ns
120
120
120
1 -40
+85 °C
L & C Match to 200 ohms
SMP-03-S 7 x 5 mm Nominal Footprint
6
RFM SF2060B=1 YYWWS
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature
range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the pass-
band. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject
to change.
5. Tape and Reel Standard Per ANSI / EIA 481.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
8. ©Copyright 1999, RF Monolithics Inc.
Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2060B-041807
Page 1 of 6
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page  
115.18 MHz
SAW Filter
SMP-03-S Case Pb
12-Terminal Ceramic Surface-Mount Case
5 x 7 mm Nominal Footprint
Case Dimensions
Dimension
mm
Min Nom Max
Inches
Min Nom Max
A 6.80 7.00 7.20 0.268 0.276 0.283
B 4.80 5.00 5.20 0.189 0.197 0.205
C
1.65 2.00
0.065 0.079
D 0.80
E 2.41 2.54 2.67 0.095 0.100 0.105
H 0.87 1.1 1.13 0.034 0.039 0.044
J 2.54
K 2.87 3.00 3.13 0.113 0.118 0.123
P 1.14 1.27 1.40 0.045 0.050 0.055
Solder Pad
Termination
www.DataSheet.net/
Lid
Body
Pb Free
Materials
Au plating 30 - 60 µinches (76.2-152 µm) over 80-
200 µinches (203-508 µm) Ni.
Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%
Phosphorus) 100-200 µinches Thick
Al2O3 Ceramic
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2060B-041807
Page 5 of 6
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet SF2060B-1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF2060B-1 | SAW Filter | RF Monolithics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |