DataSheet.es    


PDF RF3391D Data sheet ( Hoja de datos )

Número de pieza RF3391D
Descripción SAW Filter
Fabricantes RF Monolithics 
Logotipo RF Monolithics Logotipo



Hay una vista previa y un enlace de descarga de RF3391D (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! RF3391D Hoja de datos, Descripción, Manual

• Ideal Front-End Filter for European Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Complies with Directive 2002/95/EC (RoHS)10
Pb
The RF3391D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 433.42 MHz receivers. Receiver designs using this filter include superhet with
10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are
wireless remote-control and security devices operating in Europe under ETSI I-ETS 300 220.
RF3391D
433.42 MHz
SAW Filter
Characteristic
Input Power Level
DC Voltage
Storage Temperature Range
Operating Temperature Range
Soldering Temperature (10 seconds / 5 cycles maximum)
Value
+10
12
-40 to +125
-40 to +125
260
Units
dBm
VDC
°C
°C
°C
SM3838-8 Case
3.8 x 3.8
Electrical Characteristics
Characteristic
Center Frequency at 25°C
Insertion Loss
Passband Ripple (Relative to ILMIN) fc ±200 kHz
3 dB Bandwidth
Rejection relative to ILMIN
10 - 415 MHz
415 - 425 MHz
425 - 431 MHz
435 - 440 MHz
445 - 450 MHz
450 - 1000 MHz
Temperature
Freq. Temp. Coefficient
Frequency Aging
Absolute Value during the First Year
Impedance @ fc
Input ZIN = RINllCIN
Output ZOUT = ROUTllCOUT
Lid Symbolization (Y=year WW=week S=shift)
Standard Reel Quantity
Reel Size 7 Inch
Reel Size 13 Inch
Sym
fc
ILMIN
BW3
Notes
1, 2, 3
1, 3
1, 3
1, 3
1, 3
www.DataSheet.net/
FTC
|fA|
ZIN
ZOUT
5
1
9
Minimum Typical Maximum Units
433.42
MHz
2.8 3.5 dB
1.2 1.8 dB
500 600 800 kHz
40 43
30 33
20 23
10 13
dB
30 33
40 43
0.032
10
ppm/°C2
ppm/yr
137.18 ||7.58 pF
126.97 || 7.87 pF
739 // YWWS
500 Pieces/Reel
3000 Pieces/Reel
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system with VSWR
1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss and bandwidth and passband
shape are dependent on the impedance matching component values and quality.
2. The frequency fc is defined as the midpoint between the 3dB frequencies.
3. Where noted specifications apply over the entire specified operating temperature range of -40°C to +90°C.
4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may be
calculated from: f = fo [1 - FTC (To - Tc)2].
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C.
Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
9. Tape and Reel Standard Per ANSI / EIA 481.
10. This product complies with Directive 2002/95/EC of the European Parlament and of the Council of 27 January 2003 on the restriction of the use of certain
hazadous substances in electrical and electronic equipment.
www.RFM.com E-mail: [email protected]
©2008-2010 by RF Monolithics, Inc.
Page 1 of 2
RF3391D - 12/14/10
Datasheet pdf - http://www.DataSheet4U.co.kr/

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet RF3391D.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
RF3391DSAW FilterRF Monolithics
RF Monolithics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar