DataSheet.es    


PDF XPEBWT-P1-0000-007E7 Data sheet ( Hoja de datos )

Número de pieza XPEBWT-P1-0000-007E7
Descripción XP-e2 leds
Fabricantes CREE 
Logotipo CREE Logotipo



Hay una vista previa y un enlace de descarga de XPEBWT-P1-0000-007E7 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! XPEBWT-P1-0000-007E7 Hoja de datos, Descripción, Manual

Product family data sheet
Cree® XLamp® XP-E2 LEDs
Product Description
The XLamp XP-E2 LED builds on the
unprecedented performance of the
original XP-E by increasing lumen
output up to 20% while providing
a single die LED point source for
precise optical control. The XP-
E2 LED shares the same footprint
as the original XP-E, providing a
seamless upgrade path to more
lumens and/or greater efficiency
while shortening the design cycle
for existing XP customers.
XLamp XP-E2 LEDs are the ideal
choice for lighting applications
where high light output and
maximum efficacy are required,
such as LED retrofit lamps, outdoor
lighting, portable lighting, or indoor
directional lighting.
FEATURES
• Available in white, outdoor white,
80-CRI, 85-CRI and 90-CRI white
ANSI-compatible chromaticity
bins
Binned @ 85 °C
• Maximum drive current: 1 A
• Low thermal resistance: 9 °C/Wwww.DataSheet.net/
• Wide viewing angle: 110°
• Unlimited floor life at
≤ 30 °C/85% RH
• Reflow solderable - JEDEC J-STD-
020C compatible
• Electrically neutral thermal path
Table of Contents
Flux Characteristics..................... 2
Characteristics........................... 3
Relative Spectral Power
Distribution............................... 3
Relative Flux vs. Junction
Temperature.............................. 4
Electrical Characteristics.............. 4
Thermal Design.......................... 5
Relative Flux vs. Current............. 5
Relative Chromaticity vs. Current
and Temperature - Warm White.... 6
Typical Spatial Distribution........... 7
Reflow Soldering Characteristics... 8
Notes........................................ 9
Mechanical Dimensions..............10
Tape and Reel...........................11
Packaging.................................12
Copyright © 2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Datasheet pdf - http://www.DataSheet4U.co.kr/

1 page




XPEBWT-P1-0000-007E7 pdf
xlamp xp-e2 leds
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
1200
1000
800
600
Rj-a = 10°C/W
Rj-a = 15°C/W
400 Rj-a = 20°C/W
Rj-a = 25°C/W
200
0
0
20
40
60
80
100
120
Ambient Temperature (ºC)
140
Relative Flux vs. Current (TJ = 85 °C)
Relative Intensity vs. Currentwww.DataSheet.net/ (Tj = 85ºC)
250%
200%
150%
100%
50%
0%
0
100 200 300 400 500 600 700 800 900 1000
Forward Current (mA)
Copyright © 2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks
of Cree, Inc.
5
Datasheet pdf - http://www.DataSheet4U.co.kr/

5 Page





XPEBWT-P1-0000-007E7 arduino
DETAIL B
SCALE 2 : 1
xlamp xp-e2 leds
2.00 [.079]
P2
1.50 +.10 +.0039 -.00[.0591-.0000]Do
4.00 [.157]
Po
1.75 [.069]
E1
Tape and Reel
4.39
[.173]
3.7 +/-0.1mm
Bo
All Cree carrier tapes conform to5.5E0 [I.2A17-]F481D, Au1tN2.Oo00MmI[N.4A7aL2] ted Component Handling Systems Standard.
4.39 [.173]
10.25
[.404]
E2
12.30 [.484]
MWA2X.00
[.079]
P2
1.50 +.10 +.0039 -.00[.0591-.0000]Do All dimensions in mm.
8.00 [.315]
P
1.50 [.059]
D1
4.0±.1 7.3 °
2.46
+.10
-.00[
1.75±.10
3.7 +/-0.1mm
Ao
4.00 [.157]
Po
2.00 [.0792].00 [.079]
1.75 [.069]
1.50 +.101.5+0E.010+3.910 -.+0.00[0.035991-.00[0.05]D9o1-.0000]Do
P2 P2
4.00 [.1574].00 [.157]
Po Po
.30 [.012]
T
1.75 [.0691].75 [.069]
E1 E1 12.00 [.472]
4.39
[.173]
.096
+.0039
-.0000]
Ko
5.50 [.217]F
10.25
NOMINAL
12.30 [.484]
4.39
[.173]
Ao - P3O8.7C.m0K±mET.1+S/IZ-0E.1mm
1.5±.1
[.404]
E2
5.50 [.2175]F.50 [.217]F
10.25
MAX
12.00 W[.47122].00 [.472]
NOMINALNOMINAL
2.5±.110.2512.30 [.4841]2.30 [.484]
Bo -
Ko -
3.7mm8.0+0/[-.301.5C1] mamthode
Side
1.50
D1
[.059]
[.404]
E2
[.404] MAX
E2 W
2.46mm +0P.1/-0mm
MAX
W
3.7 +/-0.1mm
Bo
4.39
[.173] 3.7 +/-0.1m3.m7 +/-0.1mm
Bo Bo
.30 [.012]
T
12.0+..03
END
4.39 [.173]
4.39 [.1734].39 [.173]
8.00 [.3158].00 [.315]
PP
1.50
2.46
[.0591] .50
+.10
[-..00509[ ]
.096
+.0039
-.0000]
7.3 °D1
D1
Ko
.30 [.012].30 [.012]
TT
Anode3.7 +/-0.1mm
Ao
Side
7.3 °
(denoted by + and circle)
3.7 +/-0.1m3.m7 +/-0.1mm
Ao Ao
2.46 -+.0.100[2.46.09-+6.0.100-+[.0.0000.03099]6 -+K.0.o0000309A] o K-o
7.3 ° Bo -
POCKET SIZE
3.7mm +/-0.1mm
3.7mm +/-0.1mm
Ko - P2O.4C6mKEmPTO+SC0IZ.K1EE/-T0mSImZE
Ao - A3o.7-mm3+.7/m-0m.1m+/m-0.1mm
User Feed DirectionBo - B3o.7-mm3+.7/m-0m.1m+/m-0.1mm
Ko -STKA2o.4R-6mTm2.4+60m.1/m-0+m0m.1/-0mm
www.DataSheet.net/
Trailer
160mm (min) of
empty pockets
sealedNO6wTICEith tape
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
(20 pockets min.)CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
5
D
Loaded Pockets
(1,000 Lamps)
43
Leader
400mm (min) of
empty pockets with
2 at leas2t4010-0000009 m1 m
INDEX
1
2
QTY
1
2
sealed by tapeITEM
2400-00009-CORE
COMMENTS
(50 empty2400-00009-REEL pockets min.)
User Feed Direction
D
Cover Tape
12.4
+.2
.0
C MEASURED AT HUB
C
330
+.25
-.75
B
7"
16.4
+0.2
.0
MEASURED AT HUB
Pocket Tape
1.9±.4
13.1 ±.2
21 ±.4
B
12.4
+1.0
-.5
MEASURED AT EDGE
13mm
60°
60°
REVISONS
REV
DESCRIPTION
BY DATE APP'D
Copyright ©
of Cree, Inc.
2012
Cree, Inc.
A
All
rights
reserved.
The
information
in
this
document
is
subject
to
change
without notice. Cree ,UNLESS OTHERWISE SPECIFIED
®
DRAWN BY
DIMENSIONS ARE IN INCHES
D. CRONIN
AND AFTER FINISH.
CHECK
theDATE Cree
09/29/09
DATE
logo
and
XLamp®
4600 Silicon Drive
Durham, N.C 27703
Phone (919) 313-5300
are
registered
trademarks
TOLERANCE UNLESS SPECIFIED:
--
--
Fax (919) 313-5558
.XX ± .01
APPROVED
DATE
A
THIRD ANGLE PROJECTION
.XXX ± .005
X° ± .5 °
FOR SHEET METAL PARTS ONLY
--
MATERIAL
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
11
.X ±
.XX ±
.XXX ±
X° ±
.06
.03
.010
.5 °
ANTI-STATIC HIPS
FINAL PROTECTIVE FINISH
SIZE
C
2400-00009DRAWING NO.
REV.
A
Datasheet pdf - http://www.DataSheet4U.co.kr/
SURFACE FINISH: 63
- SCALE 0.500
SHEET
OF
1 /1
654321

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet XPEBWT-P1-0000-007E7.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
XPEBWT-P1-0000-007E7XP-e2 ledsCREE
CREE
XPEBWT-P1-0000-007E7LEDsCree
Cree
XPEBWT-P1-0000-007E8LEDsCree
Cree

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar