DataSheet.es


PDF G104SN02-V2 Datasheet ( Hoja de datos )

Número de pieza G104SN02-V2
Descripción LCD Module
Fabricantes AUO 
Logotipo AUO Logotipo
Vista previa
Total 26 Páginas
		
G104SN02-V2 datasheet

1 Page

G104SN02-V2 pdf
www.DataSheet4U.net
G104SN02 V2
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED light bar edge. Instead, press
at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be
damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
G104SN02 V2 rev. 1.0
Page 4/24

5 Page

G104SN02-V2 arduino
www.DataSheet4U.net
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item
Logic/LCD Drive Voltage
Symbol
Vin
Min
-0.3
4.2 Absolute Ratings of Environment
Item
Bulbshode39dOperatingTemperature
Symbol
TOP
Min
-30
Max
+4.0
Max
+85
G104SN02 V2
Unit
[Volt]
Unit
[oC]
Operation Humidity
HOP
5
95 [%RH]
Storage Temperature
TST
-30
+85
[oC]
Storage Humidity
HST
5
95 [%RH]
Note: Maximum Wet-
and no condensation.
G104SN02 V2 rev. 1.0
Page 10/24

11 Page





PáginasTotal 26 Páginas
PDF Descargar[ G104SN02-V2.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
G104SN02-V0LCD ModuleAUO
AUO
G104SN02-V1LCD ModuleAUO
AUO
G104SN02-V2LCD ModuleAUO
AUO

Número de piezaDescripciónFabricantes
SSM2604

Low Power Audio Codec.

Analog Devices
Analog Devices
SLG3NB3331

32.768 kHz and MHz GreenCLK.

Silego
Silego
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices
SDC1741

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar