DataSheet.es    


PDF T428P337xxxxx Data sheet ( Hoja de datos )

Número de pieza T428P337xxxxx
Descripción High Volumetric Effciency Facedown MnO2
Fabricantes KEMET 
Logotipo KEMET Logotipo



Hay una vista previa y un enlace de descarga de T428P337xxxxx (archivo pdf) en la parte inferior de esta página.


Total 17 Páginas

No Preview Available ! T428P337xxxxx Hoja de datos, Descripción, Manual

High Reliability Commercial Off-the-Shelf (COTS)
T428 Series High Volumetric Efficiency Facedown MnO2
Overview
The KEMET T428 Series was developed to provide the
volumetric efficiency of a conformally coated capacitor in a pick-
and-place friendly molded package. The planerity of the molded
package eliminates the “drops” associated with the conformally
coated tantalum surface mount devices. This new package
design offers the highest CV/cc of any molded leadframe product.
In addition, the facedown construction offers higher power ratings
per cc. The robust design features and testing protocol make this
part suitable for application in the telecommunications, industrial,
military and aerospace markets.
Benefits
• High CV/cc
• Taped and reeled per EIA 481-1
• SnPb termination finish
• Laser-marked case
• 100% surge current test available
• Halogen-free epoxy
• Capacitance values of 15 to 470 μF
• Tolerances of ±5%, ±10% and ±20%
• Voltage rating of 4 to 50 VDC
• Extended range values
• Pick-and-place friendly
• RoHS Compliant and lead-free terminations available
• Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and filtering in
telecommunications, computer, industrial, defense and aerospace
applications.
www.DataSheet.co.kr
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
One WORLD One Brand One Strategy One Focus One Team
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One KEMET
T2058_T428 • 5/14/2012 1
Datasheet pdf - http://www.DataSheet4U.net/

1 page




T428P337xxxxx pdf
High Reliability Commercial Off-the-Shelf (COTS) – T428 Series High Volumetric Efficiency Facedown MnO2
Dimensions – Millimeters
Case Size
Component
KEMET EIA
L
W
H F ±0.2 S1 ±0.2 S2 ±0.2
P 7260–38 7.2 6.0 ±0.3 3.5 ±0.3 4.95 1.6
1.6
Table 1 – Ratings & Part Number Reference
Rated
Voltage
VDC
4
6.3
6.3
10
16
16
20
25
35
50
VDC
Rated
Voltage
(V)
Rated
Capacitance
µF
470
390
470
330
180
220
150
68
22
15
µF
Rated Cap (µF)
Case Code/
Case Size
KEMET/EIA
P/7260-38
P/7260-38
P/7260-38
P/7260-38
P/7260-38
P/7260-38
P/7260-38
P/7260-38
P/7260-38
P/7260-38
KEMET/EIA
Case Code/
Case Size
KEMET Part
Number
(See below for
part options)
T428P477(1)004(2)(3)(4)(5)
T428P397(1)006(2)(3)(4)(5)
T428P477(1)006(2)(3)(4)(5)
T428P337(1)010(2)(3)(4)(5)
T428P187(1)016(2)(3)(4)(5)
T428P227(1)016(2)(3)(4)(5)
T428P157(1)020(2)(3)(4)(5)
T428P686(1)025(2)(3)(4)(5)
T428P226(1)035(2)(3)(4)(5)
T428P156(1)050(2)(3)(4)(5)
(See below for
part options)
KEMET Part
Number
DC
Leakage
μA @ +20ºC
Max/5 Min
18.8
24.6www.DataSheet.co.kr
29.6
33.0
28.8
35.2
30.0
17.0
7.7
7.5
μA @ +20ºC
Max/5 Min
DC
Leakage
DF%
%@ +20ºC
120 Hz Max
10.0
8.0
10.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
%@ +20ºC
120 Hz Max
DF
Standard
ESR
mΩ @ +20ºC
100 kHz Max
130
130
120
130
130
120
140
200
280
400
mΩ @ +20ºC
100 kHz Max
Standard
ESR
Low ESR
mΩ @ +20ºC
100 kHz Max
45
45
50
45
55
55
100
95
220
350
mΩ @ +20ºC
100 kHz Max
Low ESR
(1) To complete KEMET part number, insert J for ±5%, K for ±10% and M for ±20%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours) or A = N/A.
(3) To complete KEMET part number, insert H = solder plated or T = 100% tin (Sn). Designates termination finish.
(4) To complete KEMET part number, insert 61 = none, 62 = 10 cycles +25°C or 63 = 10 cycles -55°C +85°C. Designates surge current option.
(5) To complete KEMET part number, insert 10 = standard, 20 = low or 30 = ultra-low. Designates ESR option.
Please refer to Ordering Information for additional details.
Ultra-Low
ESR
Ω @ +20ºC
100 kHz Max
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Ω @ +20ºC
100 kHz Max
Ultra-Low
ESR
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2058_T428 • 5/14/2012 5
Datasheet pdf - http://www.DataSheet4U.net/

5 Page





T428P337xxxxx arduino
High Reliability Commercial Off-the-Shelf (COTS) – T428 Series High Volumetric Efficiency Facedown MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T P2
T2
ØDo
Po [10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ko
B1
Ao
Bo
F
W
E2
S1 P1
T1
Cover Tape
Center Lines of Cavity
ØD1
B1 is for tape feeder reference only,
including draft concentric about B o.
User Direction of Unreeling
Embossment
For cavity size,
see Note 1 Table 5
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Tape Size
D0
8 mm
12 mm
16 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
Constant Dimensions — Millimeters (Inches)
E1
P0
www.DataSheet.co.kr
P2
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
R Ref.
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
Note 3
T Maximum T1 Maximum
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Tape Size
Pitch
8 mm
12 mm
16 mm
Single (4 mm)
Single (4 mm) &
Double (8 mm)
Triple (12 mm)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Variable Dimensions — Millimeters (Inches)
E2 Minimum
6.25
(0.246)
10.25
(0.404)
14.25
(0.561)
F
3.5 ±0.05
(0.138 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
P1
4.0 ±0.10
(0.157 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
T2 Maximum
2.5
(0.098)
4.6
(0.181)
4.6
(0.181)
W Maximum
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
A0,B0 & K0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
See Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2058_T428 • 5/14/2012 11
Datasheet pdf - http://www.DataSheet4U.net/

11 Page







PáginasTotal 17 Páginas
PDF Descargar[ Datasheet T428P337xxxxx.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
T428P337xxxxxHigh Volumetric Effciency Facedown MnO2KEMET
KEMET

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar