DataSheet.es    


PDF BD63821EFV Data sheet ( Hoja de datos )

Número de pieza BD63821EFV
Descripción Silicon monolithic integrated circuits
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de BD63821EFV (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! BD63821EFV Hoja de datos, Descripción, Manual

STRUCTURE
PRODUCT SERIES
TYPE
FUNCTION
Silicon monolithic integrated circuits
2ch DC brush motor driver
BD63821EFV
PWM constant current controllable two H bridge driver
Forward, reverse, brake and stop function
Direct PWM control
1/4
Absolute maximum ratings(Ta=25°C)
Item
Symbol
Ratings
Unit
Supply voltage
Power dissipation
VCC1,2
Pd
-0.3+36.0
1.451
4.702
V
W
W
Input voltage for control pin
VIN
-0.3+7.0
V
RNF voltage
Output current
Output current(peak)4
FAULT, LOCK voltage
VRNF
IOUT
IOUTPEAK
VFAULT
0.7
1.03
1.53
-0.3+7.0
V
A/ch
A/ch
V
FAULT, LOCK current
Operating temperature range
Storage temperature range
IFAULT
Topr
Tstg
5
-25+85
-55+150
mA
°C
°C
Junction temperature
Tjmax
+150
°C
1 70mm×70mm×1.6mm glass epoxy board. Derating in done at 11.6mW/°C for operating above Ta=25°C.
2 4-layer recommended board. Derating in done at 37.6mW/°C for operating above Ta=25°C.
www.DataSheet.co.kr
3 Do not, however exceed Pd, ASO and Tjmax=150°C.
4 Pulse width tw20ms.
Operating conditions (Ta=-25+85°C)
Item
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
VCC1,2
19
24
28
V
Input voltage for control pin
VIN 0
- 5.5 V
PWM input frequency
FIN -
- 100 kHz
This product isn’t designed for protection against radioactive rays.
REV. B
Datasheet pdf - http://www.DataSheet4U.net/

1 page




BD63821EFV pdf
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.www.DataSheet.co.kr
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
R1120A
Datasheet pdf - http://www.DataSheet4U.net/

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet BD63821EFV.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BD63821EFVSilicon monolithic integrated circuitsROHM Semiconductor
ROHM Semiconductor
BD63821EFV(BD63821EFV / BD63823EFV) Moter DriversROHM Semiconductor
ROHM Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar