|
|
Número de pieza | IDT8N4Q001 | |
Descripción | Quad-Frequency Programmable XO | |
Fabricantes | IDT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IDT8N4Q001 (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! Quad-Frequency Programmable XO IDT8N4Q001 REV G
DATA SHEET
General Description
The IDT8N4Q001 is a Quad-Frequency Programmable Clock
Oscillator with very flexible frequency programming capabilities. The
device uses IDT’s fourth generation FemtoClock® NG technology for
an optimum high clock frequency and low phase noise performance.
The device accepts 2.5V or 3.3V supply and is packaged in a small,
lead-free (RoHS 6) 10-lead ceramic 5mm x 7mm x 1.55mm package.
Besides the four default power-up frequencies set by the FSEL0 and
FSEL1 pins, the IDT8N4Q001 can be programmed via the I2C
interface to output clock frequencies between 15.476MHz to
866.67MHz and from 975MHz to 1,300MHz to a very high degree of
precision with a frequency step size of 435.9Hz ÷ N (N is the PLL
output divider). Since the FSEL0 and FSEL1 pins are mapped to four
independent PLL divider registers (P, MINT, MFRAC and N),
reprogramming those registers to other frequencies under control of
FSEL0 and FSEL1 is supported. The extended temperature range
supports wireless infrastructure, telecommunication and networking
end equipment requirements.
Features
• Fourth generation FemtoClock® NG technology
• Programmable clock output frequency from 15.476MHz to
866.67MHz and from 975MHz to 1,300MHz
• Four power-up default frequencies (see part number order
codes), re-programmable by I2C
• I2C programming interface for the output clock frequency and
internal PLL control registers
• Frequency programming resolution is 435.9Hz ÷N
• One 2.5V, 3.3V LVDS clock output
• Two control inputs for the power-up default frequency
• LVCMOS/LVTTL compatible control inputs
• RMS phase jitter @ 156.25MHz (12kHz - 20MHz): 0.253ps
(typical), integer PLL feedback configuration
• RMS phase jitter @ 156.25MHz (1kHz - 40MHz): 0.263ps
(typical), integer PLL feedback configuration
• Full 2.5V or 3.3V supply modes
• -40°C to 85°C ambient operating temperature
• Available in Lead-free (RoHS 6) package
www.DataSheet.co.kr
Block Diagram
OSC ÷P
fXTAL
2
FSEL1
FSEL0
SCLK
SDATA
OE
Pulldown
Pulldown
Pullup
Pullup
Pullup
PFD FemtoClock® NG
&
VCO
÷N
LPF 1950-2600MHz
÷MINT, MFRAC
25
Configuration Register (ROM)
(Frequency, APR, Polarity)
7
I2C Control
Pin Assignment
Q
nQ
DNU 1
8 VDD
OE 2
7 nQ
GND 3
6Q
IDT8N4Q001
10-lead ceramic 5mm x 7mm x 1.55mm
package body
CD Package
Top View
IDT8N4Q001GCD REVISION A MARCH 6, 2012
1
©2012 Integrated Device Technology, Inc.
Datasheet pdf - http://www.DataSheet4U.net/
1 page IDT8N4Q001 REV G Data Sheet
QUAD-FREQUENCY PROGRAMMABLE-XO
Absolute Maximum Ratings
NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond
those listed in the DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect product reliability.
Item
Supply Voltage, VDD
Inputs, VI
Outputs, IO (SDATA)
Outputs, IO (LVDS)
Continuous Current
Surge Current
Package Thermal Impedance, JA
Storage Temperature, TSTG
Rating
3.63V
-0.5V to VDD + 0.5V
10mA
10mA
15mA
49.4C/W (0 mps)
-65C to 150C
DC Electrical Characteristics
Table 5A. Power Supply DC Characteristics, VDD = 3.3V ± 5%, TA = -40°C to 85°C
Symbol Parameter
Test Conditions
Minimum
VDD Power Supply Voltage
IDD Power Supply Current
3.135
Typical
3.3
Maximum
3.465
160
Units
V
mA
Table 5B. Power Supply DC Characteristics, VDD = 2.5V ± 5%, TA = -40°C to 85°C
www.DataSheet.co.kr
Symbol Parameter
Test Conditions
Minimum
VDD Power Supply Voltage
IDD Power Supply Current
2.375
Typical
2.5
Maximum
2.625
155
Units
V
mA
IDT8N4Q001GCD REVISION A MARCH 6, 2012
5
©2012 Integrated Device Technology, Inc.
Datasheet pdf - http://www.DataSheet4U.net/
5 Page IDT8N4Q001 REV G Data Sheet
Parameter Measurement Information (continued)
nQ
20%
Q
80%
tR
80%
tF
VOD
20%
VDD
DC Input LVDS
QUAD-FREQUENCY PROGRAMMABLE-XO
out
➤
out VOS/Δ VOS
Output Rise/Fall Time
Offset Voltage Setup
VDD
DC Input LVDS
out
➤
100 VOD/Δ VOD
out
www.DataSheet.co.kr
Differential Output Voltage Setup
IDT8N4Q001GCD REVISION A MARCH 6, 2012
11
©2012 Integrated Device Technology, Inc.
Datasheet pdf - http://www.DataSheet4U.net/
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet IDT8N4Q001.PDF ] |
Número de pieza | Descripción | Fabricantes |
IDT8N4Q001 | Quad-Frequency Programmable XO | IDT |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |