DataSheet.es    

PDF VCUT0505B-HD1 Datasheet ( Hoja de datos )

Número de pieza VCUT0505B-HD1
Descripción Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode
Fabricantes Vishay 
Logotipo Vishay Logotipo

Total 5 Páginas
		
VCUT0505B-HD1 Hoja de datos, Descripción, Manual
www.DataSheet.co.kr
VCUT0505B-HD1
Vishay Semiconductors
Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode
in LLP1006-2L
12
21129
20855
MARKING (example only)
XY
21121
Bar = pin 1marking
X = date code
Y = type code (see table below)
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
VCUT0505B-HD1
VCUT0505B-HD1-GS08
FEATURES
• Ultra compact LLP1006-2L package
• Low package profile < 0.4 mm
• 1-line ESD-protection
• Working range ± 5 V
• Low leakage current IR < 0.1 µA
• Low load capacitance CD = 18 pF
• ESD-protection acc. IEC 61000-4-2
± 20 kV contact discharge
± 25 kV air discharge
• Soldering can be checked by standard vision inspection;
no X-ray necessary
• Pin plating NiPdAu (e4) no whisker growth
• e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn)
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TAPED UNITS PER REEL
(8 mm TAPE on 7" REEL)
8000
MINIMUM ORDER QUANTITY
8000
PACKAGE DATA
DEVICE NAME
PACKAGE
NAME
VCUT0505B-HD1 LLP1006-2L
TYPE
CODE
L
WEIGHT
0.72 mg
MOLDING COMPOUND
MOISTURE
FLAMMABILITY RATING SENSITIVITY LEVEL
UL 94 V-0
MSL level 1
(according J-STD-020)
SOLDERING
CONDITIONS
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITIONS
Peak pulse current
Peak pulse power
ESD immunity
acc. IEC 61000-4-5; tp = 8/20 µs; single shot
Pin 1 to pin 2
acc. IEC 61000-4-5; tp = 8/20 µs; single shot
Contact discharge acc. IEC 61000-4-2; 10 pulses
Air discharge acc. IEC 61000-4-2; 10 pulses
Operating temperature
Junction temperature
Storage temperature
SYMBOL
IPPM
PPP
VESD
TJ
Tstg
VALUE
3.5
56
± 20
± 25
- 40 to + 125
- 55 to + 150
UNIT
A
W
kV
kV
°C
°C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITIONS/REMARKS
SYMBOL MIN.
Protection paths
Number of lines which can be protected
Nlines
-
Reverse working voltage
at IR = 0.1 µA
VRWM
5
Reverse current
at VR = 5 V
IR -
Reverse breakdown voltage
at IR = 1 mA
VBR 7
Reverse clamping voltage
at IPP = 1 A
at IPP = IPPM = 3.5 A
VC -
VC -
Capacitance
at VR = 0 V; f = 1 MHz
at VR = 2.5 V; f = 1 MHz
CD -
CD -
TYP.
-
-
-
-
-
-
18
14.5
MAX.
1
-
0.1
-
12
16
20
-
UNIT
lines
V
µA
V
V
V
V
pF
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
Document Number: 81852
Rev. 1.6, 26-Oct-10
For technical questions, contact: ESDprotection@vishay.com
www.vishay.com
1
Datasheet pdf - http://www.DataSheet4U.net/

1 page

VCUT0505B-HD1 pdf
www.DataSheet.co.kr
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Datasheet pdf - http://www.DataSheet4U.net/

5 Page



PáginasTotal 5 Páginas
PDF Descargar[ VCUT0505B-HD1.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
VCUT0505B-HD1Bidirectional Symmetrical (BiSy) Single Line ESD-Protection DiodeVishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2018   |  Privacy Policy  |  Contacto  |  Buscar