|
|
PDF XC6604 Data sheet ( Hoja de datos )
| Número de pieza | XC6604 | |
| Descripción | High Speed LDO Regulator | |
| Fabricantes | Torex Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XC6604 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
XC6604 Series
ETR03071-001a
1A, 0.5V Low Input Voltage, High Speed LDO Regulator
（Adjustable Current Limit with an external component）
GENERAL DESCRIPTION
The XC6604 series is a low voltage input (0.5V) operation and provides high accuracy ±15mV / ±20mV and can supply large
current efficiently due to its ultra low on-resistance even at low output voltages.
The series is ideally suited to the applications which require high current in low input/output voltages and consists of a N-ch
driver transistor, a voltage reference, an error amplifier, a current limiter, a fold-back circuit, a thermal shutdown (TSD) circuit, an
under voltage lock out (UVLO) circuit, a soft-start circuit and a phase compensation circuit.
Output voltage is selectable in 0.1V increments within a range of 0.5V to 1.8V using laser trimming technology and ceramic
capacitors can be used for the output stabilization capacitor (CL). When the output current reaches the current limit, the output
voltage drops as well as the output current is decreased as a function of the foldback circuit. The current limit can be
adjustable with connecting a resistor to the ILIM pin.
The CE function enables the output to be turned off and the series to be put in stand-by mode resulting in greatly reduced
power consumption. At the time of entering the stand-by mode, the series enables the electric charge at the output capacitor
(CL) to be discharged via the internal switch. As a result the VOUT pin quickly returns to the VSS level.
The CE pull-down function keeps the IC to be in stand-by mode even if the CE pin is left open.
■APPLICATIONS
Mobile phones / Smart Phones
Digital still cameras / Video cameras
Note PCs / Tablet PCs
E-book Readers
Wireless LAN
FEATURES
Maximum Output Current
: 1A (1.3A Limit)
ON Resistance
Bias Voltage Range
: 0.15Ω＠VBIAS=3.6V, VOUT=1.2V
: 2.5V～6.0V
Input Voltage Range
: 0.5V～3.0V
Output Voltage Range
: 0.5V～1.8V (0.1V increments)
Output Voltage Accuracy
Ripple Rejection
Low Power Consumption
Stand-by Current
Under-voltage Lockout
Thermal Shutdown
: ±0.015V＠VOUT＜1.2V
±0.020V＠VOUT≧1.2V
: 60dB＠f=1kHz (VBIAS_PSRR)
75dB＠f=1kHz (VIN_PSRR)
: 100μA (VBIAS), 6.5μA (VIN)＠VOUT=1.2V
: 0.01μA (VBIAS), 0.01μA (VIN)
: 1.8V (VBIAS), 0.4V (VIN)
: 150℃＠detect, 125℃＠release
Protection Circuit
: Foldback Current Limit, TSD, UVLO
Function
: Soft-start
CE Pull-Down (Active High)
CL High Speed Discharge
Operating Ambient Temperature : -40℃～+85℃
Output Capacitor
: Ceramic Capacitor Compatible (2.2μF)
Packages
: USP-6C, SOT-26W
Environmentally Friendly
: EU RoHS Compliant, Pb Free
TYPICAL APPLICATION CIRCUIT
TYPICAL PERFORMANCE
CHARACTERISTICS
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0.0
XC6604x121MR-G
VBIAS=VCE=3.6V, VIN=1.5V
CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
RLIM2=0kΩ
RLIM2=22kΩ
RLIM2=56kΩ
RLIM2=120kΩ
0.5 1.0
Output Current: IOUT(A)
1.5
1/30
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
XC6604
Series
■ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
CONDITIONS
MIN.
TYP.
MAX.
Ta=25
UNITS CIRCUIT
Bias Voltage
Input Voltage
Output Voltage
Maximum Output Current (*3)
Load Regulation
Dropout Voltage
Supply Current 1 (*6)
Supply Current 2
Stand-by Current 1
Stand-by Current 2
Bias Line Regulation
VBIAS
VIN
V (*1)
OUT(E)
IOUTMAX
ΔVOUT
Vdif (*4)
IBIAS
IIN
IBIAS_STB
IIN_STB
ΔVOUT/
(ΔVBIAS・VOUT）
IOUT=100mA
VOUT(T)＜1.2V
VOUT(T)≧1.2V
VOUT（T)＜1.2V, VBIAS=VCE=2.5V
VOUT（T)≧1.2V, VBIAS=VCE=VOUT(T)+1.3V
1mA≦IOUT≦1A
IOUT=1A
IOUT=0A
IOUT=0A
VOUT(T)＜1.2V
VOUT(T)≧1.2V
VBIAS=6.0V, VIN=3.0V, VCE=VSS
VBIAS=6.0V, VIN=3.0V, VCE=VSS
VOUT(T)＜1.2V, VCE=VBIAS, 2.5V≦VBIAS≦6.0V
VOUT（T)≧1.2V, VCE=VBIAS, VOUT(T)+1.3V≦VBIAS≦6.0V
2.5
0.5
-0.015
-0.020
-
-
V (*2)
OUT(T)
6.0
3.0
+0.015
+0.020
1.0 -
-
- 37 68
- E-1 (*5)
76 100 143
0.1 - 8.7
3.9 - 14.2
- 0.01 0.10
- 0.01 0.15
- 0.01 0.10
V
V
V
A
mV
mV
μA
μA
μA
μA
%/V
①
①
①
①
①
①
②
②
②
②
①
Input Line Regulation
ΔVOUT/
(ΔVIN・VOUT）
VOUT（T)+0.1V≦VIN≦3.0V
- 0.01 0.10 %/V
Bias UVLO Voltage
Bias UVLO Release Voltage
Input UVLO Voltage
Input UVLO Release Voltage
Output Voltage
Temperature Characteristics
Bias Ripple Rejection Ratio
Input Ripple Rejection Ratio
Current Limit (*3)
Adjustable Current
Limit Accuracy (*8)
VBIAS_UVLOD
VBIAS_UVLOR
VIN_UVLOD
VIN_UVLOR
ΔVOUT/
(ΔTopr・VOUT）
VBIAS_PSRR
VIN_PSRR
ILIM
ILIM_ADJ
IOUT=100mA
-40℃≦Topr≦85℃
VBIAS=VCE=3.6VDC+0.2Vp-pAC
IOUT=100mA, f=1kHz, CBIAS=OPEN
VIN=VOUT(T)+0.3VDC+0.2Vp-pAC
IOUT=100mA, f=1kHz, CIN=OPEN
VOUT={VOUT@IOUT=1A}×0.95
-
VSS
2.5
VSS
0.5
-
-
-
1.0
(-35)
-
-
-
-
±30
60
75
1.3
-
1.28
6.0
0.23
3.0
-
V
V
V
V
ppm/℃
- dB
- dB
-A
(35) %
Short - Circuit Current
Thermal Shutdown
Detect Temperature
ISHORT
TTSD
VOUT=VSS
Junction Temperature
- 90 - mA
- 150 - ℃
Thermal Shutdown
Release Temperature
TTSR
Junction Temperature
- 125 - ℃
Thermal Shutdown
Hysteresis Width
TTSD-TTSR
Junction Temperature
- 25 - ℃
CL Auto-Discharge Resistance
CE "H" Level Voltage
CE "L" Level Voltage
CE "H" Level Current
CE "L" Level Current
Soft-Start Time (*7) (Type A)
Output Rise Time (*7) (Type B)
RDCHG
VCEH
VCEL
ICEH
ICEL
tSS
tON
VCE=VSS, VOUT=VOUT(T)
VBIAS=VCE=6.0V
VBIAS=6.0V, VCE=VSS
VCE=0V 3.6V, tr=5 s
VCE=0V 3.6V, tr=5 s
130 190 255 Ω
0.65 - 6.00 V
VSS - 0.41 V
3.2 6.0 10.6
A
-0.1 - 0.1 A
225 430 600
s
- - 110 s
Inrush Current (Type A)
IRUSH
CL=2.2 F
CL=10 F
VOUT(T) 1.2V - - 70
VOUT(T) 1.2V
-
- 85
mA
VOUT(T) 1.2V - - 155
VOUT(T) 1.2V - - 215
NOTE:
Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA , CBIAS=CIN=1.0μF, CL=2.2μF, ILIM Pin=VSS
(*1) VOUT(E) = Effective output voltage
(*2) VOUT(T) = Nominal output voltage
(*3) Mount conditions affect heat dissipation. Maximum output current is not guaranteed when TSD starts to operate earlier.
(*4) Vdif＝{VIN1－VOUT1}
VIN1 is an input voltage when VOUT1 appears at the output during decreasing input voltage gradually.
VOUT1 is a voltage equal to 98% of the output voltage where VBIAS=VCE=3.6 and VIN=VOUT(T)+0.3V at IOUT=1A is input to the VIN pin.
(*5) Please refer to the table E-1 named DROPOUT VOLTAGE CHART
(*6) Supply current 1 (IBIAS) may be fluctuated because that some bias current flows into the output.
(*7) A time between the CE input goes over the CE H threshold and the output reaches VOUT(E)x0.9V.
(*8) Design value
①
①
①
①
①
①
③
③
①
①
①
①
①
①
①
④
④
④
④
⑤
5/30
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
www.DataSheet.co.kr
■NOTES ON USE
XC6604
Series
1. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please keep
the resistance low for the VBIAS, VIN and VSS wiring in particular.
3. Please wire the CBIAS, CIN and CL as close to the IC as possible.
4. Capacitances of these capacitors (CBIAS, CIN, CL) are decreased by the influences of bias voltage and ambient temperature. Care shall be
taken for capacitor selection to ensure stability of phase compensation from the point of ESR influence.
5. When it is used in a quite small input / output dropout voltage, output may go into unstable operation. Please test it thoroughly before using
it in production.
6. Torex places an importance on improving our products and their reliability.
We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in their systems.
11/30
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet XC6604.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XC6601 | Low Voltage Input LDO Voltage Regulators | Torex Semiconductor |
| XC6602 | High Speed LDO Regulator | Torex Semiconductor |
| XC6603 | High Speed LDO Regulator | Torex Semiconductor |
| XC6604 | High Speed LDO Regulator | Torex Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |