DataSheet.es    


PDF KDC-X7533U Data sheet ( Hoja de datos )

Número de pieza KDC-X7533U
Descripción CD RECEIVER SERVICE MANUAL
Fabricantes Kenwood 
Logotipo Kenwood Logotipo



Hay una vista previa y un enlace de descarga de KDC-X7533U (archivo pdf) en la parte inferior de esta página.


Total 44 Páginas

No Preview Available ! KDC-X7533U Hoja de datos, Descripción, Manual

www.DataSheet.co.kr
CD RECEIVER
KDC-MP632U
KDC-W6534U/UY
KDC-X590
KDC-X7533U
SERVICE MANUAL
© 2006-3 PRINTED IN JAPAN
B53-0393-00 (N) 960
CD MECHANISM EXTENSION CORD (30P) : E39-0812-05
Panel assy
KDC-MP632U (A64-3760-01)
s
KDC-MP632U
FM SCRL
AUTO
AME
Panel assy
KDC-MP6534U/UY (A64-3762-01)
s
KDC-W6534U
FM SCRL
TI
AME
VOL
AUD
SET UP
Q MENU
USB
S.MODE
SCAN
RDM
A.RDM
REP
F.SEL
M.RDM
AM SW
/C.S.
DISP
FF
Panel assy
KDC-X590 (A64-3759-01)
co
s
KDC-X590
FM SCRL
AUTO
AME
VOL
AUD
SET UP
USB
Q MENU
S.MODE
SCAN
RDM
A.RDM
REP
F.SEL
M.RDM
AM SW
/PTY
DISP
FF
Panel assy
KDC-X7533U (A64-3761-01)
s
KDC-X7533U
FM SCRL
AUTO
AME
VOL
AUD
SET UP
Q MENU
USB
S.MODE
SCAN
RDM
A.RDM
REP
F.SEL
M.RDM
AM SW
/C.S.
DISP
FF
VOL
AUD
SET UP
USB
Q MENU
S.MODE
SCAN
RDM
A.RDM
REP
F.SEL
M.RDM
AM SW
FF
* Escutcheon
(B07-xxxx-xx)
* Carrying case
(W01-xxxx-xx)
SPARE TDF PANEL
MAIN UNIT NAME TDF PARTS No.
KDC-MP632U
Y33-2540-61
KDC-W6534U
Y33-2540-63
KDC-W6534UY Y33-2540-63
KDC-X590
Y33-2540-60
KDC-X7533U
Y33-2540-62
TDF NAME
TDF-MP66D
TDF-W6534U
TDF-W6534U
TDF-65DX
TDF-X7533U
Mounting hardware assy
(J22-0011-03)
* DC cord
(E30-xxxx-xx)
* DC cord
(E30-6412-05)
* Remote controller assy (RC-527)
(A70-2067-15)
Battery
(Not supplied)
* Antenna adaptor
(T90-0523-05)
* Screw set
(N99-1757-05)
Screw set
(N99-1780-05)
Lever
* Plastic cabinet assy
(D10-4589-04) x2 (A02-2743-03)
* Compact disc
(W01-xxxx-xx)
Mounting hardware (L)
(J22-0258-04)
Mounting hardware (R)
(J22-0259-04)
* Depends on the model. Refer to the parts list.
This product uses Lead Free solder.
Datasheet pdf - http://www.DataSheet4U.net/

1 page




KDC-X7533U pdf
KDC-MP632Uwww.DataSheet.co.kr
KDC-W6534U/UY/X590/X7533U
COMPONENTS DESCRIPTION
SWITCH UNIT (X16-374x-xx)
Ref. No.
Application / Function
IC2 Remote Control IC
Q4,5
SW5V
Q10 GREEN SW
Q12~14 Grid Driver
Q15 RED SW
Q18 SUB ILLUMI SW
Q19 DBO ILLUMI SW
Q20 Key Scan Start SW
Operation / Condition / Compatibility
The power supply of IC2 is turned on when Q5’s base level goes “Hi”.
When the base goes “Hi”, LED lights.
Each grid is ON when each transistor’s base is “Lo”.
When the base goes “Hi”, LED lights.
When the base goes “Hi”, LED lights.
When the base goes “Hi”, LED lights.
Key scan starts when the base goes “Hi”.
CD PLAYER UNIT (X32-5830-00)
Ref. No.
Application / Function
IC1 Mechanism µ-COM
IC2 Signal Processor
IC4 BTL Driver
IC5
IC13
IC14
IC15
IC16
IC17
IC18
IC19
IC20
IC21
IC25
IC26
IC28
Q3
Q6,7
Q8
Q9,10
Q17
D2
D3
D9
SW3.3V Regulator
Audio Active Filter
A5V Regulator
DSP for Compression Audio Decoder
Compression Audio Codec SDRAM
Decoder Software & Unique ID Strage Flash ROM
Audio D-A Converter (24-bit external)
BU3.3V Regulator
1.8V Regulator
Decoder/SDRAM/Flash ROM/USB Driver 3.3V
Regulator
USB Host Controller
Switching among IC15 & Flash ROM &
SDRAM & USB
Clock SW
Level Shift 3.3V5V
Level Shift 3.3V5V
APC (Auto Power Control)
Anticipation Sub-beam Delay
USB Hi-side SW
Static Electricity Countermeasure
Laser Diode Protection
Static Electricity Countermeasure
Operation / Condition / Compatibility
Spindel motor, sled (including loading & eject) motor and pick-up
actuator
3.3V power supply for IC2, pick-up, IC18 digital part
2nd LPF
3.3V power supply for DAC
ACDrive decoder, MP3/WMA/AAC decoder
External 24-bit for audio
3.3V power supply for µ-com
1.8V power supply for IC15 core part
Power supply for decoder, SDRAM, flash ROM and USB driver.
3.3V power supply for IC15 port parts, IC16, IC17, IC25, IC26 and IC28.
For DSP for Compression Audio Decoder, Flash ROM, SDRAM and USB
To SDRAM
During non-searching
For IC2 built-in reset terminal
5
Datasheet pdf - http://www.DataSheet4U.net/

5 Page





KDC-X7533U arduino
KDC-MP632Uwww.DataSheet.co.kr
KDC-W6534U/UY/X590/X7533U
TEST MODE
How to enter the test mode
Press and hold the [1] and [3] keys and reset.
(While “– – – –” is being displayed, power can be ON for 30
minutes.)
How to clear the test mode
Reset, momentary power down, Acc OFF, Power OFF, detach
the panel.
Initial conditions of the test mode
• Source is STANDBY.
• Displays lights are all turned on.
• The volume is at –10dB (The display is 30).
• Loudness (LOUD) is OFF.
• CRSC is OFF, regardless of whether there are switching
functions or not.
• SYSTEM Q is NATURAL (=FLAT).
• BEEP will sound anytime with a less than 1 second push.
• Auxiliary (AUX) is ON.
• SWPRE is SUB WOOFER.
RDS automatic measurement
Conventionally, the PS display has been visually checked on
the production line. This will be replaced by a new processing.
The PS data will be received and the PS contents is to be
verified as “RDS_TEST”. When this is verified, the P-CON
terminal is forced to go OFF. (In this case, “ _ ” means blank.)
This will be a dedicated test mode processing.
On the P-CON, when power is turned off once and, then,
turned on again, (Power OFF ON) the unit will be re-
started.
Special display when set to TUNER
When in TUNER mode, if any of the following displays appear,
there is an abnormality with the front-end.
• “TNE2P_NG” : The E2PROM of front-end is still with the
default (unspecified) value.
• “TNCON_NG” : The communication with the front-end is
not possible.
Forced switching of K3I
In TUNER FM mode, each time [6] key is pressed, the func-
tions move in the following cycle :
AUTO forced WIDE forced MIDDLE force NARROW
AUTO
The initial condition is AUTO and the displays below will ap-
pear.
• AUTO : FM1_98.1A
• Forced MIDDLE : FM1_98.1M
• Forced WIDE : FM1_98.1W
• Forced NARROW : FM1_98.1N
CD receiver test mode specifications
• Display mode default setting shall be P-TIME.
• Jumps are made to the following tracks by pressing the
[ ] key.
No. 9 No. 15 No. 10 No. 11 No. 12 No. 13
No. 22 No. 14 No. 9 (Returns to the beginning)
It must be noted, however, that when paying MP3 / WMA /
AAC disc, which contain 8 files or less, the first track and
the following tracks are played in order.
• Pressing the [ ] key goes back by 1 track from the track
being played.
• When playing an MP3 / WMA / AAC disc, display the file
format before starting to play each file. (“MP3”, “WMA”,
“AAC”)
• When in CD source, by pressing [1] key for less than 1
second, a jump to the Track No. 28 is made.
• When in CD source, by pressing [2] key for less than 1
second, a jump to the Track No. 14 is made.
• While in CD source, press the [3] key to display the CD
mechanism model name and the version. Press the [3] key
again to go back to the normal screen. (Time code display)
6680:0123
Model name
Version
• When CD is the source, press the [6] key to jump to No. 15.
At this time, the volume value is set to 25 (2V PRE) or 27
(4V PRE).
USB source test mode specification
• While in USB source, press the [6] key to set volume value
to 15.
Audio adjust mode
Model with no DSP
• By pressing [AUD] key for less than 1 second, the audio
adjustment mode can be entered.
• Using the remote controller [] key and [AUD] key, the au-
dio adjustment mode can be entered.
• Adjustment items of both the AUDIO FUNCTION MODE
and SETUP MODE are included.
• The initial item will be Fader, which is followed by : Balance
Bass Level Middle Level Treble Level HPF Front
HPF Rear LPF Sub Woofer (After this, it will be arbi-
trary)
11
Datasheet pdf - http://www.DataSheet4U.net/

11 Page







PáginasTotal 44 Páginas
PDF Descargar[ Datasheet KDC-X7533U.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
KDC-X7533UCD RECEIVER SERVICE MANUALKenwood
Kenwood

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar