DataSheet.es    


PDF ICTE10C Data sheet ( Hoja de datos )

Número de pieza ICTE10C
Descripción (ICTE5 - ICTE18C) Transient Voltage Suppressors
Fabricantes Vishay Siliconix 
Logotipo Vishay Siliconix Logotipo



Hay una vista previa y un enlace de descarga de ICTE10C (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! ICTE10C Hoja de datos, Descripción, Manual

www.DataSheet.co.kr
ICTE5 thru ICTE18C, 1N6373 thru 1N6386
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
Case Style 1.5KE
PRIMARY CHARACTERISTICS
VWM
PPPM
PD
IFSM
TJ max.
5.0 V to 18 V
1500 W
6.5 W
200 A
175 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use C suffix (e.g. ICTE18C).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and
bi-directional
• 1500 W peak pulse power capability
with a 10/1000 μs waveform, repetitive
rate (duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Find out more about Vishay’s Automotive Grade
Product requirements at:
www.vishay.com/applications
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of sensor
units for consumer, computer, industrial and
telecommunication.
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 8)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Maximum instantaneous forward voltage at 100 A for uni-directional only
Operating junction and storage temperature range
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum
SYMBOL
PPPM
IPPM
PD
IFSM
VF
TJ, TSTG
LIMIT
1500
See next table
6.5
200
3.5
- 55 to + 175
UNIT
W
A
W
A
V
°C
Document Number: 88356 For technical questions within your region, please contact one of the following:
Revision: 07-May-10
www.vishay.com
1
Datasheet pdf - http://www.DataSheet4U.net/

1 page




ICTE10C pdf
www.DataSheet.co.kr
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Datasheet pdf - http://www.DataSheet4U.net/

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet ICTE10C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ICTE10TVS Diode ( Rectifier )Vishay
Vishay
ICTE10(ICTE5 - ICTE18C) Transient Voltage SuppressorsVishay Siliconix
Vishay Siliconix
ICTE10Diode TVS Single Uni-Dir 10V 1.5KW 2-Pin Case 41A-04 BoxNew Jersey Semiconductor
New Jersey Semiconductor
ICTE10CTVS Diode ( Rectifier )Vishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar