|
|
PDF LC863332C Data sheet ( Hoja de datos )
| Número de pieza | LC863332C | |
| Descripción | 8-bit 1-chip Microcontroller | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC863332C (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
Ordering number : ENA0116A
LC863364C,LC863356C
LC863348C,LC863340C
LC863332C,LC863328C
LC863324C,LC863320C
LC863316C
CMOS IC
64K/56K/48K/40K/32K/28K/24K/20K/16K-byte ROM,
CGROM16K-byte
on-chip 640/512-byte RAM and 352×9-bit OSD RAM
8-bit 1-chip Microcontroller
Overview
The LC863364C/56C/48C/40C/32C/28C/24C/20C/16C are 8-bit single chip microcontrollers with the following on-chip
functional blocks:
• CPU : Operable at a minimum bus cycle time of 0.424µs
• On-chip ROM capacity
Program ROM : 64K/56K/48K/40K/32K/28K/24K/20K/16K bytes
CGROM : 16K bytes
• On-chip RAM capacity : 640/512 bytes
• OSD RAM : 352×9 bits
• Five channels×8-bit AD Converter
• Three channels×7-bit PWM
• Two 16-bit timer/counters, 14-bit base timer
• 8-bit synchronous serial interface circuit
• IIC-bus compliant serial interface circuit (Multi-master type)
• ROM correction function
• 15-source 9-vectored interrupt system
• Integrated system clock generator and display clock generator
X’tal oscillator (32.768kHz) for PLL reference is used for TV control
All of the above functions are fabricated on a single chip.
Note : This product includes the IIC bus interface circuit. If you intend to use the IIC bus interface, please notify us of this in
advance of our receiving your program ROM code order.
Purchase of SANYO IIC components conveys a license under the Philips IIC Patents Rights to use these components in
an IIC system, provided that the system conforms to the IIC Standard Specification as defined by Philips.
Trademarks
IIC is a trademark of Philips Corporation.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
Ver.1.00
83006 / 52506HKIM No.A0116-1/21
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
LC863364C/56C/48C/40C/32C/28C/24C/20C/16C
Package Dimensions
unit : mm
3025C
37.7
42 22
1 21
0.95
(1.05)
1.78
0.48
Package Dimensions
unit : mm
3156A
36
37
17.2
14.0
25
24
SANYO : DIP42S(600mil)
48
1
(1.5)
1.0
13
12
0.35
0.15
SANYO : QIP48E(14X14)
No.A0116-5/21
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
www.DataSheet.co.kr
LC863364C/56C/48C/40C/32C/28C/24C/20C/16C
Recommended Operating Range at Ta = -10°C to +70°C, VSS = 0V
Parameter
Operating
supply voltage
range
Hold voltage
High level input
voltage
Low level input
voltage
Operation
cycle time
Oscillation
frequency
range
Symbol
VDD(1)
VDD(2)
VHD
VIH(1)
VIH(2)
VIH(3)
VIH(4)
VIL(1)
VIL(2)
VIL(3)
VIL(4)
tCYC(1)
tCYC(2)
tCYC(3)
FmRC
VDD
Pins
VDD
Port 0 (Schumitt)
•Ports 1,6 (Schumitt)
•Port 7 (Schumitt)
port input/interrupt
• HS , VS , RES (Schumitt)
Port 70
Watchdog timer input
•Port 8
port input
Port 0 (Schumitt)
•Ports 1,6 (Schumitt)
•Port 7 (Schumitt)
port input/interrupt
• HS , VS , RES (Schumitt)
Port 70
Watchdog timer input
Port 8
port input
Conditions
0.844µs ≤ tCYC ≤ 0.852µs
4µs ≤ tCYC ≤ 400µs
RAMs and the registers
data are kept in HOLD
mode.
Output disable
Output disable
Output disable
Output disable
Output disable
Output disable
Output disable
Output disable
•All functions
operating
•AD converter
operating
•OSD is not
operating
•OSD and AD converter
are not operating
Internal RC oscillation
VDD[V]
min
4.5
4.5
2.0
4.5 to 5.5 0.6VDD
4.5 to 5.5 0.75VDD
4.5 to 5.5 VDD-0.5
4.5 to 5.5
4.5 to 5.5
0.7VDD
VSS
4.5 to 5.5
VSS
4.5 to 5.5
4.5 to 5.5
4.5 to 5.5
VSS
VSS
0.844
4.5 to 5.5
0.844
4.5 to 5.5
0.844
4.5 to 5.5
0.4
Ratings
typ
0.848
0.8
max
5.5
5.5
5.5
VDD
VDD
VDD
VDD
0.2VDD
0.25VDD
0.6VDD
0.3VDD
0.852
30
400
3.0
unit
V
µs
MHz
No.A0116-11/21
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 21 Páginas | |
| PDF Descargar | [ Datasheet LC863332C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC863332 | 8-Bit Single Chip Microcontroller | Sanyo Semicon Device |
| LC863332A | 8-Bit Single Chip Microcontroller | Sanyo Semicon Device |
| LC863332B | (LC8633xxB) 8-Bit Single Chip Microcontroller |  Sanyo Electric |
| LC863332C | 8-bit 1-chip Microcontroller | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |