|
|
PDF EB8 Data sheet ( Hoja de datos )
| Número de pieza | EB8 | |
| Descripción | Edgeboard Connectors | |
| Fabricantes | Vishay Siliconix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EB8 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
EB8
Vishay Dale
Edgeboard Connectors, Dual Readout
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 55 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: (With gold plating) After 500 cycles of insertion
and withdrawal of a 0.070" (1.78 mm) thick steel test
gauge, contact resistance less than 0.030 V at 5 A and
individual contact retention force when measured with 0.054"
(1.37 mm) thick steel test slug greater than ½ oz.
Shock: Three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows
Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side
Contact Spacing: 0.156" (3.96 mm) center to center
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: Dual readout = 0.330" (8.38 mm)
Note
• High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
FEATURES
• 0.156" C-C x 0.200" grid (3.96 mm x 5.08 mm)
• Greater design latitude
3 body materials: Diallyl phthalate, phenolic and
glass-filled polyester
6 contact termination styles, 8 body sizes, 7 mounting
styles
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes
• Selective gold plating
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
MATERIAL SPECIFICATIONS
Body:
“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F
green, flame retardant (UL 94 V-0)
“2” glass-filled phenolic per MIL-M-14, type MFH dark green,
flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,
flame retardant (UL 94 V-0)
Contacts: Phosphor bronze
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
Contact Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB8 1
B A 22
SG
XA
MODEL BODY MATERIAL OPTIONAL STANDARD CONTACTS CONTACT PLATING
MOUNTING POLARIZING
CONTACTS TERMINAL PER SIDE
VARIATIONS KEY POSITIONS
Optional body
VARIATIONS
SG = Selective gold plating
material
Beryllium copper
6, 10, 12, (0.00003" (0.000762 mm)
Key(s) are located to
1 = Diallyl contacts optional. A, C, D, 15, 18, 22, minimum thick) on contact area
right of position(s)
phthalate
Available in “A” K, L, or E 24 or 25 with gold flash on terminal
designated. Required
2 = Phenolic and “E” contact
SGF = Selective gold plating
only when polarizing
3 = Glass-filled
polyester
5 = Glass-filled
polyphenylene
sulfied
styles only (Omit
for standard)
(0.000010" (0.000254 mm)
minimum thick) on contact area
with gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel
underplate.
keys are to be factory
installed
Contact factory for additional
plating options.
www.vishay.com
14
For technical questions, contact: [email protected]
Document Number: 36005
Revision: 16-Feb-09
Datasheet pdf - http://www.DataSheet4U.net/
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet EB8.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EB-014-00-1 | Keypad board |  Matrix Multimedia |
| EB-ACDC | DMS-EB-AC/DC |  ETC |
| EB-TA2022 | CLASS-T DIGITAL AUDIO AMPLIFIER 2 CHANNEL TA2022 EVALUATION BOARD | ETC |
| EB014 | Keypad board | Matrix Multimedia |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |