DataSheet.es    


PDF KX3001 Data sheet ( Hoja de datos )

Número de pieza KX3001
Descripción Synchronous Boost DC/DC Regulator
Fabricantes SZKXW 
Logotipo SZKXW Logotipo




1. KX3001






Hay una vista previa y un enlace de descarga de KX3001 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! KX3001 Hoja de datos, Descripción, Manual

www.DataSheet.co.kr
Synchronous Boost DC/DC Regulator KX3001
KX3001
Features
Description
Up to 94% Efficiency
Low voltage start-up 0.9V
Shut-down current: < 1 A
Input voltage 0.9V 4.4V
Output voltage 2.5V 4.3V (Up to 5V
with Schottky)
Low switch on resistance RDS(ON),
Internal switch: 0.35
1.4MHz fixed frequency switching
High switch on current: 1A
Low profile SOT-23-6 package (lead-free
packaging is now available)
Applications
Digital cameras and MP3
Palmtop computers / PDAs
Cellular phones
Wireless handsets and DSL modems
PC cards
Portable media players
The KX3001 is high efficiency synchronous,
PWM step-up DC/DC converters optimized
to provide a high efficient solution to
medium power systems. The devices work
under the input voltage between 0.9V and
4.4V with a 1.4MHz fixed frequency
switching. These features minimize overall
solution footprint by allowing the use of tiny,
low profile inductors and ceramic
capacitors.
The KKX3001 is capable of supplying an
output voltage between 2.5V and 4.3V, the
internal synchronous switch is desired to
provide high efficiency without Schottky.
The devices also featured providing up to
260mA from a single AA cell input or up to
600mA from a 2-cell AA with a 3V/3.3V
output.
The KX3001 regulators are available in the
industry standard SOT-23-6 power packages
(or upon request).
Order Information
KX3001 -
:
SYMBOL
DESCRIPTION
Denotes Output voltage:
A : Adjustable Output
Denotes Package Types:
F: SOT-23-6
www.szkxw.com
-1-
Datasheet pdf - http://www.DataSheet4U.net/

1 page




KX3001 pdf
www.DataSheet.co.kr
Application Information
KX3001
SW (Pin 1): Switch Pin. Connect inductor between SW and VIN. Keep these PCB trace lengths
as short and wide as possible to reduce EMI and voltage overshoot.
GND (Pin 2): Signal and Power Ground. Provide a short direct PCB path between GND and the
(–) side of the output capacitor(s).
FB (Pin 3): Feedback Input to the gm Error Amplifier. Connect resistor divider tap to this pin. The
output voltage can be adjusted from 2.5V to 5V by: VOUT = 1.212V • [1 + (R1/R2)]
EN (Pin 4): Logic Controlled Shutdown Input. EN = High: Normal free running operation,
1.5MHz typical operating frequency. EN = Low: Shutdown, quiescent current <1µA. Output
capacitor can be completely discharged through the load or feedback resistors.
VOUT (Pin 5): Output Voltage Sense Input and Drain of the Internal Synchronous Rectifier
MOSFET. Bias is derived from VOUT. PCB trace length from VOUT to the output filter capacitor(s)
should be as short and wide as possible.
VIN (Pin 6): Battery Input Voltage. The device gets its start-up bias from VIN. Once VOUT exceeds
VIN, bias comes from VOUT. Thus, once started, operation is completely independent from VIN.
Operation is only limited by the output power level and the battery’s internal series resistance.
Functional Diagram
www.szkxw.com
-5-
Datasheet pdf - http://www.DataSheet4U.net/

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet KX3001.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
KX3001Synchronous Boost DC/DC RegulatorSZKXW
SZKXW

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar