G104SN02_V2 Hoja de datos PDF

PDF G104SN02_V2 Datasheet ( Hoja de datos )

Número de pieza G104SN02_V2
Descripción LCD Module
Fabricantes AUO 
Logotipo AUO Logotipo
Vista previa
Total 26 Páginas
G104SN02_V2 datasheet

1 Page

G104SN02_V2 pdf
G104SN02 V2
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED light bar edge. Instead, press
at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
G104SN02 V2 rev. 1.0
Page 4/24

5 Page

G104SN02_V2 arduino
G104SN02 V2
3. Functional Block Diagram
The following diagram shows the functional block of the 10.4 inch color TFT/LCD module:
G104SN02 V2 rev. 1.0
Page 9/24

10 Page

PáginasTotal 26 Páginas
PDF Descargar[ G104SN02_V2.PDF ]

Enlace url

Hoja de datos destacado

Número de piezaDescripciónFabricantes
G104SN02-V0LCD ModuleAUO
G104SN02-V1LCD ModuleAUO
G104SN02-V2LCD ModuleAUO
G104SN02_V0LCD ModuleAUO
G104SN02_V1LCD ModuleAUO
G104SN02_V2LCD ModuleAUO

Número de piezaDescripciónFabricantes

Low Power Audio Codec.

Analog Devices
Analog Devices

32.768 kHz and MHz GreenCLK.


High Voltage 3 phase Motor Driver IC.


12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z    |   2018   |  Contacto  |  Buscar