|
|
PDF IP267 Data sheet ( Hoja de datos )
| Número de pieza | IP267 | |
| Descripción | Stepper Motor Controller | |
| Fabricantes | Siemens AG | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IP267 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
SIMATIC S5
IP 267
Stepper Motor Controller
Manual
EWA 4NEB 812 6061-02a
www.DataSheet4U.net
1 page  
IP 267
Introduction
Introduction
The following pages contain information which will help you to use this manual.
Description of contents
The manual covers the following topics:
• System Overview
(functional description, schematic diagram)
• Driving Stepper Motors with the IP 267
(fundamental terms of stepper motor control, description of the con-
figuration data)
• Module Description
(technical specifications, power supply, input and output signals, terminal
assignments, status displays, connecting cables for power sections)
• Addressing and Programming
(address assignment of the configuration message frames, positioning
message frames and feedback message frames, flowchart)
• Notes on Operation
(preparing the module, system startup, determining reference points, motor
selection, diagnostics sheet)
• Application Examples
(program examples for various applications)
• FB for assigning parameters to the IP 267
At the end of the book, you will find correction forms. Please enter any
suggestions you may have in the way of improvements or corrections in this form
and send it to us. Your comments will help us to improve the next edition.
EWA 4NEB 812 6061-02a
vii
5 Page 
IP 267
System Overview
1 System Overview
As an intelligent input/output module, the IP 267 adds positioning to the
repertoire of the S5-100U programmable controller. The IP 267 controls
positioning processes independent of the execution times of the user programs in
the programmable controller and the CPU is not loaded by current positioning
jobs.
You can plug the IP 267 into slots 0 to 7 of the S5-100U where it occupies
addresses in the analog address area of the programmable controller (bytes 64 to
127). The IP 267 runs with all CPUs except the CPU 100 (6ES5 100-8MA01).
The IP 267 has the following performance characteristics:
• Serial interface to the S5-100U programmable controller
• Digital inputs for calibrating and limiting traversing ranges
• Status displays for various operating states
• Programmable pulse generator
• Interfaces for commercial stepper motor power sections with 5 V differential
inputs or other logic inputs in the range of 5 V to 30 V.
1
EWA 4NEB 812 6061-02a
1-1
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet IP267.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IP267 | Stepper Motor Controller | Siemens AG |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |