|
|
PDF BD9244AFV Data sheet ( Hoja de datos )
| Número de pieza | BD9244AFV | |
| Descripción | Silicon Monolithic Integrated Circuit | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BD9244AFV (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
STRUCTURE
NAME OF PRODUCT
Silicon Monolithic Integrated Circuit
DC-AC Inverter Control IC
TYPE
FUNCTION
ＢＤ９２４４ＡＦＶ
・ 36V High voltage process
・ 1ch control with Full-Bridge
・ Lamp current and voltage sense feed back control
・ Sequencing easily achieved with Soft Start Control
・ Short circuit protection with Timer Latch
・ Under Voltage Lock Out and Over Voltage Protection
・ Mode-selectable the operating or stand-by mode by stand-by pin
・ BURST mode controlled by PWM and DC input
○Absolute Maximum Ratings（Ｔａ＝２５℃）
Parameter
Symbol
Limits
Unit
Supply Voltage
VCC 36
V
BST PIN
BST 40
V
SW PIN
BST-SW voltage difference
SW
BST-SW
36
15
V
V
Operating Temperature Range
Topr
-40～+85
℃
Storage Temperature Range
Tstg
-55～+150
℃
Maximum Junction Temperature
Tjmax
+150
℃
Power Dissipation
Pd 1024* mW
*Pd derate at 5.6mW/℃ for temperature above Ta = 25℃ (When mounted on a PCB 70.0mm×70.0mm×1.6mm)
1/4
〇Operating condition
Parameter
Supply voltage
BST voltage
BST-SW voltage difference
oscillation frequency
BCT oscillation frequency
Symbol
VCC
BST
BST-SW
FOUT
fBCT
Limits
9.0～30.0
5.0～37.5
5.0～14.0
30～110
0.05～1.00
Unit
V
V
V
kHz
kHz
www.DataSheet4U.com
REV. A
1 page  
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
www.DataSheet4U.com
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet BD9244AFV.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BD9244AFV | Silicon Monolithic Integrated Circuit | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |