DataSheet.es    


PDF B25671A4826A375 Data sheet ( Hoja de datos )

Número de pieza B25671A4826A375
Descripción Film Capacitors - Power Factor Correction
Fabricantes EPCOS 
Logotipo EPCOS Logotipo



Hay una vista previa y un enlace de descarga de B25671A4826A375 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! B25671A4826A375 Hoja de datos, Descripción, Manual

Film Capacitors – Power Factor Correction
PoleCap capacitor
Series/Type:
Ordering code:
Date:
Version:
MKK440-D-5-P
B25671A4826A375
June 2009
2
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
Film Capacitors – Power Factor Correction
Identification/Classification 2
(header 2 + bottom left header bar):
PoleCap capacitor
Ordering code: (top right header bar)
B25671A4826A375
Series/Type: (top right header bar)
MKK440-D-5-P
Preliminary data (optional):
(if necessary)
Department:
FK PC PM PFC
Date:
June 2009
Version:
2
www.DataSheet4U.com
EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited

1 page




B25671A4826A375 pdf
Film Capacitors – Power Factor Correction
PoleCap capacitor
B25671A4826A375
MKK440-D-5-P
Cautions and warnings
In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not
be used at all.
This applies also in cases of oil leakages.
To ensure the full functionality of the overpressure disconnector, elastic elements must not be
hindered and a minimum space of 12 mm has to be kept above each capacitor.
Do not handle the capacitor before it is discharged.
Resonance cases must be avoided by appropriate application design in any case.
Handle capacitors carefully, because they may still be charged even after disconnection due to
faulty discharging devices.
Protect the capacitor properly against over current and short circuit.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
Discharging
Capacitors must be discharged to a maximum of 10% of rated voltage before they are switched in
again. This prevents an electric impulse discharge in the application, influences the capacitor’s
service life and protects against electric shock. The capacitor must be discharged to 75 V or less
within 3 minutes. There must be not any switch, fuse or any other disconnecting device in the circuit
between the power capacitor and the discharging device. PoleCap-capacitors have a pre-mounted
ceramic discharge module; alternatively discharge reactors are available from EPCOS. Discharge and
short circuit capacitor before handling!
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
Safety
Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property
damage may result from bursting of the capacitor or from expulsion of oil or melted material due to
mechanical disruption of the capacitor.
Ensure good, effective grounding for capacitor enclosures.
Provide means of disconnecting and insulating a faulty component/bank.
The terminals of capacitors, connected bus bars and cables as well as other devices may also be
energized.
Follow good engineering practice.
Thermal load/over-temperature
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not
exceeded at extreme service conditions.
www.DataSheet4U.com
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 8
June 2009

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet B25671A4826A375.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
B25671A4826A375Film Capacitors - Power Factor CorrectionEPCOS
EPCOS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar