|
|
PDF N4376B Data sheet ( Hoja de datos )
| Número de pieza | N4376B | |
| Descripción | 20 GHz and 26.5 GHz Single-Mode Lightwave Component Analyzer | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de N4376B (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
Agilent
N4376B
20 GHz and 26.5 GHz Multimode
Lightwave Component Analyzer
Data Sheet
www.DataSheet4U.com
1 page  
Definitions
Explanation of terms
Generally, all specifications are valid at the stated operat-
ing and measurement conditions and settings, with uninter-
rupted line voltage.
Specifications (guaranteed)
Describes warranted product performance that is valid under
the specified conditions.
Specifications include guard bands to account for the ex-
pected statistical performance distribution, measurement
uncertainties changes in performance due to environmental
changes and aging of components.
Typical values (characteristics)
Characteristics describe the product performance that is
usually met but not guaranteed. Typical values are based on
data from a representative set of instruments.
General characteristics
Give additional information for using the instrument. These
are general descriptive terms that do not imply a level of
performance.
Responsivity
For electro-optical devices (e.g. modulators ) this describes
the ratio of the optical modulated output signal amplitude
compared to the RF input amplitude of the device.
For opto-electrical devices (e.g. photodiodes) this describes
the ratio of at the RF amplitude at the device output to the
amplitude of the modulated optical signal input. .
Relative frequency response uncertainty
Describes the maximum deviation of the shape of a mea-
sured trace from the (unknown) real trace. This specification
has strong influence on the accuracy of the 3-dB cut-off fre-
quency determined for the device under test.
Absolute frequency response uncertainty
Describes the maximum difference between any amplitude
point of the measured trace and the (unknown) real value.
This specification is useful to determine the absolute re-
sponsivity of the device versus modulation frequency.
Frequency response repeatability
Describes the deviation of repeated measurement without
changing any parameter or connection relative to the aver-
age of this measurements.
Minimum measurable frequency response
Describes the average measured responsivity when no mod-
ulation signal is present at the device under test. This repre-
sents the noise floor of the measurement system.
Definition of LCA input and output names
www.DataSheet4U.com
LCA electrical port A
LCA electrical port B
LCA optical output
LCA optical input
5
5 Page 
General Characteristics
Assembled dimensions: (H x W x D)
Option
-312, -314
41.3 cm x 43.8 cm x 53.8 cm,
(16.3 in x 17.3 in x 21.2 in)
-322 41.3 cm x 43.8 cm x 47.3 cm,
Weight
(16.3 in x 17.3 in x 18.7 in)
Product net weight:
-312 36 kg (79.4 lbs)
-314 46 kg (101.4 lbs)
-322 34 kg (74.9 lbs)
Packaged product:
-312 56 kg (123.5 lbs)
-314 66 kg (145.7 lbs)
-322 54 kg (119 lbs)
Power Requirements
100 to 240 V~, 50 to 60 Hz
2 power cables
N5230C
max. 350 VA
N5242A
max 450 VA
Optical test set: max. 40 VA
Network-analyzer
Option 312
N5242A -200
Option 314
N5242A -400
Option 322
N5230C- 225
Storage temperature range
-40° C to +70° C
Operating temperature range
+5° C to +32° C
Humidity
15 % to 80 % relative humidity, non-condensing
Altitude (operating)
0 ... 2000 m
Recommended re-calibration period
1 year
www.DataSheet4U.com
Shipping contents
1x Network-analyzer depending on option selected
1x N4376B optical test set
2x 81000 NI optical adaptor
1x 4376B-90A01 Getting started
1x 4375B-90CD1 LCA support CD
1x 1150-7896 Keyboard
1x 1150-7799 Mouse
1x 8121-1242 USB cable
1x E5525-10285 UK6 report
1x N4373-61627 electrical short cut cable
1x 9320-6677 RoHS addendum for Photonic T&M
accessories
1x 9320-6654 RoHS addendum for Photonic T&M products
Additional, option dependent shipping contents:
-023 2x LC 50μm to FC/APC 0.5 m patch cord
-024 2x LC 62.5μm to FC/APC 0.5 m patch cord
-025 2x SC 50μm to FC/APC 0.5 m patch cord
-026 2x SC 62.5μm to FC/APC 0.5 m patch cord
-312, 322 2 port LCA:
1x E7342-60004 0.5 m (m) to (f) high performance RF cable
-314 4 port LCA:
2x E7342-60004 0.5 m (m) to (f) high performance RF cable
LCA connector types [1]
Optical test set
LCA port A
LCA port B
LCA optical input
LCA optical output
3.5 mm (m)
3.5 mm (m)
62.5 μm single-mode angled [1],
with Agilent universal adapter
50 μm single-mode angled[1],
with Agilent universal adapter
[1] The optical test set always has angled connectors.
For input and output a 50 μm or 62.5 μm angled to straight
LC or SC patchcord must be selected The connection to the
DUT is always either LC or SC straight.
The jumper cable must always be used in front of the optical
testset to protect the connectors of the optical testset.
Laser Safety Information
All laser sources listed above are classified as Class 1M
according to IEC 60825 1 (2001).
All laser sources comply with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated 2001-July-26.
11
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet N4376B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| N4376B | 20 GHz and 26.5 GHz Single-Mode Lightwave Component Analyzer | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |