|
|
PDF B3B-PH Data sheet ( Hoja de datos )
| Número de pieza | B3B-PH | |
| Descripción | PH Connector | |
| Fabricantes | JST | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B3B-PH (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
PH CONNECTOR
Emboss Tape
2.0mm pitch/Disconnectable Crimp style connectors
This is a thin, low-profile 2.0mm pitch
connector 8.0mm in height after mounting
and 4.5mm in width. It is designed to meet
the demand for high-density connection of
internal wires to printed circuit boards. It is
compact, highly reliable and low in cost.
• Reliable contact
• Fully shrouded header
• Printed circuit board retention mechanism
• Surface mount model (SMT)
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
2R75087
PC board layout and Assembly layout
Through-hole type (viewed from soldering side)
Top entry type
Side entry type
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
SMT type (viewed from component side)
SM4 type
Top entry type
www.DataSheet4U.com
End face of wafer
on the mating side
Side entry type
End face of wafer
on the mating side
Circuit
No.1
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
Circuit
No.1
1
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet B3B-PH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B3B-PH | PH Connector | JST |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |