DataSheet.es    


PDF XS5 Data sheet ( Hoja de datos )

Número de pieza XS5
Descripción Round Water-resistant Connectors
Fabricantes Omron 
Logotipo Omron Logotipo



Hay una vista previa y un enlace de descarga de XS5 (archivo pdf) en la parte inferior de esta página.


Total 18 Páginas

No Preview Available ! XS5 Hoja de datos, Descripción, Manual

Round Water-resistant Connectors (M12)
XS5
Water-resistant Smartclick Connectors
That Reduce Installation Work
• A newly developed lock structure that maintains
compatibility with conventional, screw-type M12
connectors.
• Simply insert the Connectors, then turn them approximately
1/8 of a turn to lock.
• A positive click indicates locking.
• Features the same degree of protection (IP67) as
conventional, screw-type M12 connectors.
• Connector with cable are UL approved
TM
Specifications
Rated current
Rated voltage
Contact resistance
(connector)
Insulation resistance
Dielectric strength
(connector)
Degree of protection
Insertion tolerance
Lock strength
Cable holding strength
Lock operating force
Ambient operating
temperature range
4A
250 VDC
40 mΩ max.
(20 mV max., 100 mA max.)
1,000 MΩ min. (at 500 VDC)
1,500 VAC for 1 min.
(leakage current: 1 mA max.)
IP67 (IEC60529)
50 times min.
Pulling: 100 N/15 s, Twisting: 1 N·m/15 s
100 N/15 s (for cable diameter of 6 mm)
0.1 N·m to 0.25 N·m
25°C to 70°C
Recommended Cables
Cable outer diameter
(mm)
8 mm
7 mm
6 mm
4 mm
3 mm
7 to 8 mm
6 to 8 mm
5 to 6 mm
4 to 5 mm
3 to 4 mm
Crimping
models
Two types of
connectors are
available.
0.18 to 0.3mm2
0.5 to 0.75mm2
Core sizes
Soldering
models
Screw-on
models
0.18 to 0.75mm2
0.5 mm2 max.
Connection Combinations
Materials and Finish
Item
Model XS5F/H/W/R
XS5M/P
XS5C/G
Contacts Materials
Phosphor bronze
Brass
Finish
Nickel base, 0.4-μm gold-plating
Fixtures
Nickel-plated zinc alloy
Pin Block
PBT resin (UL94V-0)
O-ring
Rubber
Overmolding/Cover
Polyester
elastomer
PBT resin
(UL94V-0)
Standard
cable
UL AWM2464,
6-mm dia.
4 cores × AWG20
(0.12/49)
Cable
Vibration-
proof robot
cable
UL CL3,
6-mm dia.
4 cores × AWG20
(0.08/110)
Oil-resistant 6 dia.
polyurethane 4 cores × 0.5 mm2
cable
(0.12/45)
Seal Resin
Epoxy Resin —
(UL94V-0)
Power supply wires
UL 1007
AWG20
Note: 1. See “XS5/XS2 - Assembly Tooling and Accessories” datasheet
for information regarding assembly, tooling and accessories
that are common to the XS5 and XS2 connectors
2. See “XS2” datasheet for specifics regarding those connectors
OMRON model No.
Smartclick Socket
Connectors
M12 Socket Connectors
XS5F, XS5C, XS5P
XS5W (socket side)
XS5R, (socket side)
XS2F, XS2C, XS2P
XS2W (socket side)
XS2R (socket side)
Smartclick Plug
Connectors
XS5H, XS5G, XS5M
XS5W (plug side)
XS5R (plug side)


Note:
TM is a registered trademark of the OMRON Corporation.
M12 Plug Connectors
XS2H, XS2G, XS2M
XS2W (plug side)
XS2R (plug side)


: Connected by SmartclickTM twisting. 
: Connected by screwing.
Round Water-resistant Connectors (M12) XS5 123

1 page




XS5 pdf
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
XS5H - D42@ - @80 - @
1 2 34 5 6 78 9
1. Type
H: Connector connected to cable, plug on one cable end
2. AC/DC (Mating Section Form)
D: DC
3. Connector Poles
4: 4 poles
4. Contact Plating
2: 0.4-μm gold plating
5. Cable Connection Direction
1: Straight
2: Angled
6. Cable Length
A: 0.3 m G: 5 m
B: 0.5 m H: 7 m
C: 1 m
J: 10 m
D: 2 m
K: 15 m
E: 3 m
L: 20 m
F: 4 m
7. Connections
8: A Brown, B White, C Blue, D Black
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
0: One end
9. Cable Specifications
A: Standard cable
F: Vibration-proof robot cable
P: Oil-resistant polyurethane cable
Round Water-resistant Connectors (M12) XS5 127

5 Page





XS5 arduino
Ordering Information
No. of Poles
4
5
Connection
Method
Crimping
Soldering
Screw-on
Screw-on
Suitable cable dia.
(mm)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
8 mm (7 to 8)
7 mm (6 to 7)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
8 mm (7 to 8)
7 mm (6 to 7)
Straight
XS5G-D4C1
XS5G-D4C3
XS5G-D4C5
XS5G-D421
XS5G-D423
XS5G-D425
XS5G-D4S1
XS5G-D4S3
XS5G-D4S5
XS5G-D4S7
XS5G-D4S9
XS5G-D5S1
XS5G-D5S3
XS5G-D5S5
XS5G-D5S7
XS5G-D5S9
Model
Angled
XS5G-D422
XS5G-D424
XS5G-D426
XS5G-D4S2
XS5G-D4S4
XS5G-D4S6
Standard pack
quantity
10
Note: XS5G Screw-on Plugs cannot be connected side-by-side to the CN1 and CN2 connectors of XS2R or XS5R Y-Joint Sockets / Plugs
XS5U
(Crimping pin for XS5G)
Dimensions
XS5U-312@
Plug Pin
(Unit: mm)
Slit Dimensions
1 dia.
1.5
B
A
2 dia. 2.3 dia.
C dia.
Model
Suitable core
size (mm2)
XS5U-3121
0.18 to 0.3
(22 to 24 AWG)
XS5U-3122
0.5 to 0.7
(18 to 20 AWG)
Dimension (mm)
ABC
22.6
6.1
0.8
22.7
6.2
1.3
No. of
slits
1
0
Note: 1. A special tool must be used for crimping. For details, refer to the “XS5/XS2 - Assembly Tooling and Accessories” datasheet.
2. AWG size is based on UL1007 wire.
Ordering Information
Suitable core size (mm2)
0.18 to 0.3
0.5 to 0.75
Model
XS5U-3121
XS5U-3122
Standard Pack
Quantity
100
Round Water-resistant Connectors (M12) XS5 133

11 Page







PáginasTotal 18 Páginas
PDF Descargar[ Datasheet XS5.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
XS1-G04B-FB144MCUXmos
Xmos
XS1-G04B-FB512MCUXmos
Xmos
XS1-L01A-LQ64MCU 32BIT 8KB OTPXmos
Xmos
XS1-L01A-TQ48MCU 32BIT 8KB OTPXmos
Xmos

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar