|
|
PDF XPM-2101WG Data sheet ( Hoja de datos )
| Número de pieza | XPM-2101WG | |
| Descripción | 10Gb/s 1310 nm XFP Extended Multi-Mode Optical Transceiver | |
| Fabricantes | Optoway Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XPM-2101WG (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
Optoway
1
XPM-2101WG
***********************************************************************************************************************************************************************
XPM-2101WG
(RoHS Compliant)
10Gb/s 1310 nm XFP Extended Multi-Mode Optical Transceiver for 10GbE-LRM Applications
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
z Support 10.3125 Gbps
XPM-2101WG series extended multi-mode 10G XFP
z Complaint with XFP MSA
transceiver is designed for serial optical data
z Compliant to IEEE 802.3aq-2006 10GBASE-LRM
communications such as 10 GBASE-LRM. It supports the
z Link Length from 0.5 to 300 m with OM1 MMF
10Gbps transmission on both 50/125 μm and 62.5/125 μm
z Link Length from 0.5 to 300 m with OM2 MMF
MMF.
z Link Length from 0.5 to 300 m with OM3 MMF
The transceiver consists of two sections: The transmitter
z 1310 nm Transmitter
section consists of a directly modulated 1310 nm FP laser,
z 2-Wire Interface for Integrated Digital Diagnostic
driver and signal conditioner. The receiver section
Monitoring
incorporates a PIN photodiode integrated with a
z No reference clock required
trans-impedance preamplifier (TIA) and signal conditioner.
z Low Power Dissipation < 2.0 W
The module is with the XFP 30-pin connector to allow
z Only Required +3.3 V Power Supply
hot plug capability. Integrated Tx and Rx signal conditioners
z RoHS Compliant
z 0 to 70oC Case Operating Temperature
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
z Duplex LC Connector
high speed serial I/O simplifies interfacing to external
circuitry. Only single 3.3V power supply is needed. The
APPLICATIONS
z 10G Ethernet at 10.3125Gbps
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
STANDARD
z Compliant with XFP MSA
z Compliant with IEEE 802.3aq-2006
receiver.
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance Wavelength
(m) (nm)
XPM-2101WG
10.3125
300*
1310
*: see below table for transmission distance in MM fiber
Package
XFP with DMI
Connector
LC
Temp
(oC)
0 to 70
RoHS
Compliant
Yes
Multimode Fiber Type**
ISO/IEC 11801:2002
Operating Range
Fiber Type
(m)
62.5 μm 160/500
0.5 to 300
62.5 μm 200/500
OM1
0.5 to 300
50 μm 500/500
OM2
0.5 to 300
50 μm 1500/500***
OM3
0.5 to 300
**: Each fiber type is identified by its core diameter followed by a pair of OFL bandwidth values separated by “/”. The OFL
www.DbantadSwhiedetth4sUa.rceoimn MHz-km and are for 850 nm and 1300nm respectively.
***: The OM3 fiber specification includes the 850 nm laser launch bandwidth in addition to the OFL bandwidth.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 1/12/2009 V2.0
1 page  
Optoway
5
XPM-2101WG
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN Logic
1
2
3 LVTTL-I
4 LVTTL-O
Signal Name
GND
VEE5
Mod_Desel
Interrupt
5 LVTTL-I TX_DIS
6 VCC5
7 GND
8 VCC3
9 VCC3
10 LVTTL-I/O SCL
11 LVTTL-I/O SDA
12 LVTTL-O Mod_Abs
13 LVTTL-O Mod_NR
14 LVTTL-O RX_LOS
15 GND
16 GND
17 CML-O
RD-
www.Da1t8aSCheMeLt4-OU.com RD+
19 GND
20 VCC2
Table 3 PIN Description
Description
Module Ground
-5.2V Power Supply (Not required)
Module De-select; When held low allows module to respond to 2-wire serial interface
Interrupt; Indicates presence of an important condition which can be read over the
2wire serial interface
Transmitter Disable; Turns off transmitter laser output
+5V Power Supply (Not required)
Module Ground
+3.3V Power Supply
+3.3V Power Supply
Serial 2-wire interface clock
Serial 2-wire interface data line
Indicates Module is not present. Grounded in the Module
Module Not Ready; Indicating Module Operational Fault
Receiver Loss Of Signal Indicator
Module Ground
Module Ground
Receiver Inverted Data Output
Receiver Non-Inverted Data Output
Module Ground
+1.8V Power Supply (Not required)
Note
1
3
2
3
1
2
2
2
2
2
1
1
1
3
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 1/12/2009 V2.0
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet XPM-2101WG.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XPM-2101WG | 10Gb/s 1310 nm XFP Extended Multi-Mode Optical Transceiver | Optoway Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |