|
|
PDF B57964S Data sheet ( Hoja de datos )
| Número de pieza | B57964S | |
| Descripción | NTC thermistors | |
| Fabricantes | EPCOS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B57964S (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
NTC thermistors for
temperature sensing and compensation
Leaded NTC thermistors,
lead spacing 2.5 mm
Series/Type:
Date:
B57964S
July 2009
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
1 page  
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 2.5 mm
R/T No.
T (°C)
160.0
165.0
170.0
175.0
180.0
185.0
190.0
195.0
200.0
205.0
210.0
215.0
220.0
225.0
230.0
235.0
240.0
245.0
250.0
1008
8016
B25/100 = 3560 K
B25/100 = 3988 K
RT/R25
0.02279
0.020667
α (%/K) RT/R25
2.0
2.0
α (%/K)
0.01878
0.01709
0.015582
0.014227
0.013012
0.011934
0.010964
0.0101
0.0093191
0.0085949
1.9
1.9
1.8
1.8
1.8
1.7
1.7
1.7
1.6
1.6
0.0079384
0.0073411
0.006798
0.0063087
0.0058623
0.0054487
0.0050705
1.6
1.5
1.5
1.5
1.5
1.4
1.4
B57964S
S964
www.DataSheet4U.com
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 17
5 Page 
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 2.5 mm
B57964S
S964
www.DataSheet4U.com
Bending strength: Test Ub:
Two 90°-bends in opposite directions at a weight of 0.25 kg.
Torsional strength: Test Uc: severity 2
The lead is bent by 90° at a distance of 6 to 6.5 mm from the thermistor body.
The bending radius of the leads should be approx. 0.75 mm. Two torsions of
180° each (severity 2).
When subjecting leads to mechanical stress, the following should be observed:
Tensile stress on leads
During mounting and operation tensile forces on the leads are to be avoided.
Bending of leads
Bending of the leads directly on the thermistor body is not permissible.
A lead may be bent at a minimum distance of twice the wire's diameter +2 mm from the solder
joint on the thermistor body. During bending the wire must be mechanically relieved at its outlet.
The bending radius should be at least 0.75 mm.
Twisting of leads
The twisting (torsion) by 180° of a lead bent by 90° is permissible at 6 mm from the bottom of the
thermistor body.
4 Sealing and potting
When thermistors are sealed, potted or overmolded, there must be no mechanical stress caused
by thermal expansion during the production process (curing / overmolding process) and during
later operation. The upper category temperature of the thermistor must not be exceeded. Ensure
that the materials used (sealing / potting compound and plastic material) are chemically neutral.
5 Cleaning
If cleaning is necessary, mild cleaning agents such as ethyl alcohol and cleaning gasoline are
recommended. Cleaning agents based on water are not allowed. Ultrasonic cleaning methods are
permissible.
6 Storage
In order to maintain their solderability, thermistors must be stored in a non-corrosive atmosphere.
Humidity, temperature and container materials are critical factors.
Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise, the packing ma-
terial may be deformed or SMDs may stick together, causing problems during mounting. After
opening the factory seals, such as polyvinyl-sealed packages, use the SMDs as soon as possible.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 17
11 Page | ||
| Páginas | Total 17 Páginas | |
| PDF Descargar | [ Datasheet B57964S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B57964S | NTC thermistors | EPCOS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |