DataSheet.es    


PDF SDMA12C-8.TB Data sheet ( Hoja de datos )

Número de pieza SDMA12C-8.TB
Descripción (SDMA05C-8 - SDMA24C-8) Bidirectional TVS Array
Fabricantes Semtech Corporation 
Logotipo Semtech Corporation Logotipo



Hay una vista previa y un enlace de descarga de SDMA12C-8.TB (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! SDMA12C-8.TB Hoja de datos, Descripción, Manual

SMDA05C-8 through SMDA24C-8
Bidirectional TVS Array
for Protection of Eight Lines
PROTECTION PRODUCTS
Description
Features
The SMDAxxC-8 series of transient voltage suppres-
sors are designed to protect components which are
connected to data and transmission lines from voltage
surges caused by electrostatic discharge (ESD), electri-
cal fast transients (EFT), and lightning.
TVS diodes are characterized by their high surge
capability, low operating and clamping voltages, and
fast response time. This makes them ideal for use as
board level protection of sensitive semiconductor
components. The SMDAxxC-8 is designed to provide
transient suppression on multiple data lines and I/O
ports. The low profile SO-14 design allows the user to
protect up to eight data and I/O lines with one pack-
age. They are bidirectional device and may be used on
lines where the normal operating voltage is above and
below ground (i.e. -12V to +12V).
The SMDAxxC-8 TVS diode array will meet the surge
requirements of IEC 61000-4-2 (Formerly IEC 801-2),
Level 4, “Human Body Model” for air and contact
discharge.
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 12A (8/20µs)
‹ Small SO-14 surface mount package
‹ Protects eight I/O lines
‹ Working voltages: 5V, 12V, 15V and 24V
‹ Low leakage current
‹ Low operating and clamping voltages
‹ Solid-state silicon avalanche technology
Mechanical Characteristics
‹ JEDEC SO-14 package
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Part Number, Logo, Date Code
‹ Packaging : Tape and Reel per EIA 481
‹ RoHS/WEEE Compliant
Applications
‹ RS-232 and RS-422 Data Lines
‹ Microprocessor Based Equipment
‹ LAN/WAN Equipment
‹ Set-Top Box
‹ Notebooks, Desktops, and Servers
‹ Portable Instrumentation
‹ Peripherals
‹ Serial and Parallel Ports
Circuit Diagram
Schematic & PIN Configuration
1 & 14
7&8
2 3 12 13 5 6 9 10
Revision 04/12/05
www.DataSheet.in
1
1 14
2 13
3 12
4 11
5 10
69
78
SO-14 (Top View)
www.semtech.com

1 page




SDMA12C-8.TB pdf
SMDA05C-8 through SMDA24C-8
PROTECTION PRODUCTS
Applications Information
Device Connection for Protection of Eight Data Lines
The SMDAxxC-8 is designed to protect up to 8 data or
I/O lines. They are bidirectional devices and may be
used on lines where the signal polarities are above and
below ground.
The SMDAxxC-8 TVS arrays employ a monolithic struc-
ture. Therefore, the working voltage (VRWM) and break-
down voltage (VBR) specifications apply to the differen-
tial voltage between any two data line pins. For ex-
ample, the SMDA24C-8 is designed for a maximum
voltage excursion of ±12V between any two data lines.
The device is connected as follows:
z Pins 2, 3, 5, 6, 9, 10, 12 and 13 are connected to
the lines that are to be protected. Pins 1, 7, 8,
and 14 are connected to ground. The ground
connections should be made directly to the ground
plane for best results. The path length is kept as
short as possible to reduce the effects of parasitic
inductance in the board traces. Pins 4 and 11 are
not connected.
Circuit Diagram
GND 1
I/O 1 2
I/O 2 3
N.C. 4
I/O 3 5
I/O 4 6
GND 7
14 GND
13 I/O 8
12 I/O 7
11 N.C.
10 I/O 6
9 I/O 5
8 GND
Connection Diagram
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
z Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
z Minimize the path length between the TVS and the
protected line.
z Minimize all conductive loops including power and
ground loops.
z The ESD transient return path to ground should be
kept as short as possible.
z Never run critical signals near board edges.
z Use ground planes whenever possible.
Matte Tin Lead Finish
Matte tin has become the industry standard lead-free
replacement for SnPb lead finishes. A matte tin finish
is composed of 100% tin solder with large grains.
Since the solder volume on the leads is small com-
pared to the solder paste volume that is placed on the
land pattern of the PCB, the reflow profile will be
determined by the requirements of the solder paste.
Therefore, these devices are compatible with both
lead-free and SnPb assembly techniques. In addition,
unlike other lead-free compositions, matte tin does not
have any added alloys that can cause degradation of
the solder joint.
2005 Semtech Corp.
www.DataSheet.in
5
www.semtech.com

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet SDMA12C-8.TB.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SDMA12C-8.T(SDMA05C-8 - SDMA24C-8) Bidirectional TVS ArraySemtech Corporation
Semtech Corporation
SDMA12C-8.TB(SDMA05C-8 - SDMA24C-8) Bidirectional TVS ArraySemtech Corporation
Semtech Corporation
SDMA12C-8.TBT(SDMA05C-8 - SDMA24C-8) Bidirectional TVS ArraySemtech Corporation
Semtech Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar