|
|
PDF D845GERG2 Data sheet ( Hoja de datos )
| Número de pieza | D845GERG2 | |
| Descripción | Quick Reference | |
| Fabricantes | Intel | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de D845GERG2 (archivo pdf) en la parte inferior de esta página. Total 48 Páginas | ||
|
No Preview Available !
Intel® Desktop Boards
D845GERG2 and D845GEBV2
Quick Reference
This guide is written for technically qualified personnel with experience
installing and configuring desktop boards.
Before You Begin..................................................................................... 3
Warning and Cautions......................................................................... 3
Safety and Regulatory Notice ............................................................. 3
Desktop Board Components ................................................................ 4
Supported Components......................................................................... 5
Installation Steps ..................................................................................... 7
1 Installing the I/O Shield ................................................................ 7
2 Installing the Desktop Board......................................................... 7
3 Installing the Processor ................................................................. 8
4 Installing the Memory Modules .................................................... 8
5 Installing an AGP Card ................................................................. 9
6 Attaching IDE Drives................................................................... 11
7 Connecting Fans........................................................................... 12
8 Connecting Power Cables ............................................................ 12
Using the BIOS Setup Program........................................................... 13
Setting the BIOS Configuration Jumper Block ............................... 13
Troubleshooting...................................................................................... 14
Customer Support Links....................................................................... 15
Items on the Intel® Express Installer CD-ROM
• Product warranty
• Intel Express Installer
• Intel® Desktop Boards D845GERG2 and D845GEBV2 Product Guide
• Software utilities and drivers
• Software license agreement
• Readme file
www.DataSheet4U.com
A99402-005
1 page  
Desktop Board Components (continued)
A Audio codec
B Front panel audio connector
C Auxiliary line-in connector (ATAPI)
D Rear chassis fan connector
E CD-ROM connector (ATAPI)
F 12 V processor core voltage
connector
G Intel® Graphics and Memory
Controller Hub (GMCH)
H Processor socket
I Processor fan connector
J DIMM sockets
K Main power connector
L Diskette drive connector
M Secondary IDE connector
✏ NOTE
N Primary IDE connector
O Speaker
P Battery
Q SCSI hard drive activity LED
connector
R Chassis intrusion connector
S Front chassis fan connector
T BIOS configuration jumper block
U Intel® I/O Controller Hub (ICH4)
V Front panel USB 2.0 connector
W AGP connector
X PCI bus add-in card connectors
Y Communication and Networking
Riser (CNR) (optional)
The number of PCI slots on your board may differ from those in the
illustrations.
Supported Components
Processors
The board supports a single processor with the following features:
Type
Intel® Pentium® 4 processor
on .13 micron process in an
mPGA478 package
Intel Pentium 4 processor on
.18 micron process in an
mPGA478 package
Intel® Celeron® processor in
an mPGA478 package
Designation
2.8, 2.66, 2.53,
2.4B, and
2.26 GHz
2.6, 2.5, 2.40,
2.20, 2A, 1.80A,
and 1.60A GHz
2, 1.90, 1.80,
1.70, 1.60, 1.50,
and 1.4 GHz
1.8 and 1.7 GHz
Front Side Bus
Frequency
533 MHz
400 MHz
400 MHz
400 MHz
L2 Cache
512 KB
512 KB
256 KB
128 KB
For the latest information on processors supported by Desktop Boards
D845GERG2 and D845GEBV2, refer to the Intel World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
Intel Desktop Boards D845GERG2 and D845GEBV2
Quick Reference
5
www.DataSheet4U.com
5 Page 
6 Attaching IDE Drives
The Intel® boxed desktop board package includes two IDE cables. Either cable
can connect two drives to the desktop board. The cables support the Ultra
DMA-33 (40-contact, 40-conductor) or ATA-66/100 (40-contact, 80-conductor)
transfer protocols and are backward compatible with drives using slower IDE
transfer protocols.
The cable will work correctly only when oriented as shown in the following
figure. For correct cable function:
1. Observe the precautions in “Before You Begin” on page 3.
2. Attach the cable end with the single connector (A) to the board.
3. Attach the cable end with the two closely spaced connectors (B) to the
drives.
www.DataSheet4U.com
A
B
OM14729
Intel Desktop Boards D845GERG2 and D845GEBV2
Quick Reference
11
11 Page | ||
| Páginas | Total 48 Páginas | |
| PDF Descargar | [ Datasheet D845GERG2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| D845GERG2 | Quick Reference | Intel |
| D845GERG2 | Technical Product Specification | Intel |
| D845GERG2 | Product Guide | Intel |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |