DataSheet.es    


PDF XC25BS7 Data sheet ( Hoja de datos )

Número de pieza XC25BS7
Descripción PLL Clock Generator ICs
Fabricantes Torex Semiconductor 
Logotipo Torex Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de XC25BS7 (archivo pdf) en la parte inferior de esta página.


Total 13 Páginas

No Preview Available ! XC25BS7 Hoja de datos, Descripción, Manual

XC25BS7 Series
PLL Clock Generator ICs with Built-In Divider/Multiplier Circuits
www.DataSheet4U.com
ETR1505-007a
GENERAL DESCRIPTION
The XC25BS7 series are high frequency, low power consumption PLL clock generator ICs with divider circuit & multiplier PLL
circuit. Laser trimming gives the option of being able to select from input divider ratios (M) of 1 to 256 and output divider
ratios (N) of 1 to 256. Output frequency (fQ0) is equal to reference clock oscillation (fCLKin) multiplied by N/M, within a
range of 1MHz to 100MHz. Further, frequency within a range of 32kHz to 36MHz can be inputted as a reference clock. The
IC stops operation when low level signal is inputted to the CE pin. For this, consumption current can be reduced and output
will be one of high-impedance. Because the series is semi-custom, please ask Torex sales contacts for your requested
specifications such as input/output frequency, supply voltage. However, the series has the limit of specifications; therefore,
your request may not be fully satisfied with your requested frequency range.
APPLICATIONS
Clock for controlling a Imaging dot
Microcomputer and HDD drives
Cordless phones
Wireless communication equipment
PDAs
Cameras, VCRs
Various system clocks
FEATURES
Input Frequency
: 32kHz ~ 36MHz (*1)
Output Frequency
: 1MHz ~ 100MHz
(fQ0=fCLKin × N/M) (*1)
Output Divider (N)
: Selectable from divisions
from 1 to 256 (*1)
Input Divider (M)
Operating Voltage Range
Low Power Consumption
: Selectable from divisions
from 1 to 256 (*1)
: 2.50V ~ 5.50V (*1)
: CMOS with stand-by function (*2)
(10μA, MAX. when stand-by)
Packages
: SOT-25, USP-6C
Environmentally Friendly :EU RoHS Compliant, Pb Free
*1: The series are semi-custom products. Specifications for
each product are limited within the above range. The input
frequency range is set within ±5 of customer’s designated
typical frequency.
*2: When the IC is in stand-by mode, the output becomes high
impedance and the IC stops operation.
TYPICAL APPLICATION CIRCUIT
TYPICAL PERFORMANCE
CHARACTERISTICS
PLL output signal jitter 2 (equivalent to an input signal)
XC25BS7001xx (256 multiplier, Input 48kHz, TYP.)
Output jitter
Tj2=20 (ns)
*1: CIN (by-pass capacitor, 0.1 F) should be connected to the
IC as close as possible.
*2: Rq0 is a resistor for unwanted radiation only to use when
needed.
1/13

1 page




XC25BS7 pdf
XC25BS7
www.DataSheet4US.coemries
ELECTRICAL CHARACTERISTICS (Continued)
Recommended Operating Conditions: XC25BS7001xx (256 multiplication, Input 48kHz (TYP.)) 3.3V (TYP.)
Tested below Ta=25OC
PARAMETER
SYMBOL
CONDITIONS
MIN.
MAX.
UNIT
Supply Voltage
Input Frequency
Multiplier/Divider Ratio
Output Frequency
Capacity Overload (*3)
Output Start Time (*2)(*3)
VDD
fCLKin
N/M
fQ0
CL
tSTART
3.3V (TYP.) operation
(*1)
Typical value is shown (*1)
(*1)
fCLKin45kHz
2.97 3.63
45.000
60.000
256
11.520
15.360
- 15
0.05 20
V
kHz
-
MHz
pF
ms
NOTE:
*1: Connected CIN=0.1 F of a ceramic capacitor between the VDD pin the VSS pin while testing.
*2: Time until signal via the Q0 pin flows stably from applying supply voltage to the VDD pin and control voltage to the CE pin while
applying the input signal to the CLKin pin.
*3: The value indicated at output start time is designed values which are not guaranteed values.
DC Characteristics: XC25BS7001xx (256 multiplication, Input 48kHz (TYP.) ) 3.3V (TYP.)
PARAMETER
H Level Input Voltage
L Level Input Voltage
H Level Input Current
L Level Input Current
H Level Output Voltage
L Level Output Voltage
Supply Current 1
Supply Current 2
CE H Level Voltage
CE L Level Voltage
CE Pull-Down Resistance 1
CE Pull-Down Resistance 2
Output Off Leak Current
SYMBOL
VIH
VIL
IiH
IiL
VOH
VOL
IDD1
IDD2
VCEH
VCEL
Rdn1
Rdn2
IOZ
Test Conditions: VDD=3.3V, fCLKin=48kHz, Multiplier ratio=256, Ta=25 , No Load
CONDITIONS
MIN. TYP. MAX. UNIT CIRCUIT
2.70 - - V
- - 0.60 V
VCLKin=VDD-0.3V
VCLKin=0.3V
VDD=2.97V, IOH=-4mA
VDD=2.97V, IOL= 4mA
VDD=3.63V, CE= 3.63V
VDD=3.63V, CE= 0.0V
- - 3.0 μA
-3.0 -
- μA
2.50 - - V
- - 0.40 V
-
3.0 6.0
mA
- - 10 μA
2.70 - - V
- - 0.45 V
CE=VDD
CE=0.1 x VDD
VDD=Q0=3.63V, CE= 0.0V
0.2 1.0 1.8
M
10 30 60
k
- - 10 μA
AC Characteristics: XC25BS7001xx (256 multiplication, Input 48kHz (TYP.)) 3.3V (TYP.)
PARAMETER
Output Rise Time (*1)
Output Fall Time (*1)
SYMBOL
tr
tf
Test Conditions: VDD=3.3V, fCLKin=48kHz, Multiplier ratio=256, Ta=25 , CL=15pF
CONDITIONS
MIN. TYP. MAX. UNIT CIRCUIT
(20% ~ 80%)
- 2.5 5.0 ns
(20% ~ 80%)
- 2.5 5.0 ns
Output Signal Duty (*1)
PLL Output Signal Jitter 1 (*1)
PLL Output Signal Jitter 2 (*1)
Duty
tJ1
tJ
fQ060MHz
45 50
55
fQ060MHz
40 50
60
1σ (Output Period)
- 20 -
Peak to Peak (Output Tracking) - 20 -
ps
ns
NOTE:
*1: Values indicated at the AC Characteristics are designing values, which are not guaranteed values.
5/13

5 Page





XC25BS7 arduino
PACKAGE INFORMATION
SOT-25
USP-6C
XC25BS7
www.DataSheet4US.coemries
USP-6C Reference Mount Pattern
* No. 1 pin is larger than the other pins.
Soldering fillet surface is not formed because the
sides of the pins are not plated.
USP-6C Reference Metal Masking
11/13

11 Page







PáginasTotal 13 Páginas
PDF Descargar[ Datasheet XC25BS7.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
XC25BS3CMOS Low Power ConsumptionTorex Semiconductor
Torex Semiconductor
XC25BS5PLL Clock Generator ICs with Built-In Divider/Multiplier Circuits (For Low Frequency range)Torex Semiconductor
Torex Semiconductor
XC25BS5001MLPLL Clock Generator ICs with Built-In Divider/Multiplier Circuits (For Low Frequency range)Torex Semiconductor
Torex Semiconductor
XC25BS5001MRPLL Clock Generator ICs with Built-In Divider/Multiplier Circuits (For Low Frequency range)Torex Semiconductor
Torex Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar