DataSheet.es    


PDF BD8924G Data sheet ( Hoja de datos )

Número de pieza BD8924G
Descripción Silicon monolithic integrated circuit
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de BD8924G (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! BD8924G Hoja de datos, Descripción, Manual

www.DataSheet4U.com
1/4
● Structure
● Product name
● Type
● Package outline
● Block Diagram
Silicon monolithic integrated circuit
Boost DCDC converter for TV tuner
BD8924G
Fig. 1
Fig. 2
● Features
1) For varactor voltage in the TV tuner.
2) Over current Protection circuit
3) SSOP-5 small size
This chip is not designed to protect itself against radioactive rays.
Absolute maximum ratings(Ta=25℃)
Parameter
Symbol
Ratings
Unit
Condition
Maximum applied voltage1
Vmax1
7.0
V It applies to VIN terminal
Maximum applied voltage 2 Vmax2
36
V It applies to SW, VOUT terminals
Power dissipation
Pd1
674.9 (Note1)
mW At single unit
Operating temperature range Topr
-30 ~ +85
oC
Storage temperature range
Tstr
-55 ~ +150
oC
(Note1) Pd derated at 5.4mW/℃ for temperature above Ta=25℃,
mounted on 70mm×70mm×1.6mm glass-epoxy PCB.
Operation condition(Ta=25℃)
Parameter
Power supply voltage range
Symbol
VCC
Ratings
4.5~5.5
Unit Condition
V VIN terminal voltage
REV. A

1 page




BD8924G pdf
Notice
www.DataSheet4U.com
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet BD8924G.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BD8924GSilicon monolithic integrated circuitROHM Semiconductor
ROHM Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar