|
|
PDF CAT8710 Data sheet ( Hoja de datos )
| Número de pieza | CAT8710 | |
| Descripción | Quad-Voltage Supervisor | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CAT8710 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
CAT8710
www.DataSheet4U.com
Quad Voltage Supervisor
The CAT8710 is a space-saving, precision quad voltage supervisor,
designed to monitor up to four supply voltages with a single device.
When any supply voltage drops below its preset threshold, the
CAT8710 will output a single reset to the threshold. One CAT8710 IC
eliminates the need for multiple reset circuits, which minimizes
system components and improves reliability.
The CAT8710 provides 2 factory preset thresholds for monitoring
3.3 V, 3.0 V, 2.5 V, and 1.8 V supplies within ±5% and 2
user-selectable thresholds, adjustable down to 0.62 V with 2%
accuracy. On power up, the reset remains low for 120 ms typical, after
all voltages have risen above their selected thresholds. The output
remains valid as long as VDD remains above 1 V.
The CAT8710 is available in a 6−pin SOT23 package and operates
over the industrial temperature range of −40°C to +85°C.
Features
• Monitors 4 Power−Supply Voltages Simultaneously
• 2 Factory Preset Reset Threshold Options for 3.3 V, 3.0 V, 2.5 V, and
1.8 V Supplies
• 2 User−Programmed Threshold Monitors, Adjustable Down to
0.62 V with 2% Accuracy
• Drop−in replacement to MAX6710
• Low Supply Current: 3 mA (typ)
• Ultra Low Power vs. Maxim
• Reset Timeout Period: 120 ms (typ)
• RESET Valid to VCC = 1 V
• Immune to Short Supply Transients
• Temperature Range: −40°C to +85°C
• Small, SOT23 6−Pin Package
• This Device is Pb−Free, Halogen Free/BFR Free and RoHS
Compliant
Applications
• Monitoring of Multiple Power Supply Voltages
CAT8710
VDD
V1
Power
Supplies
V2/VDD
V3 RESET
mP
V4
GND
http://onsemi.com
1
SOT23−6
TD SUFFIX
CASE 527AJ
MARKING DIAGRAM
VJYM
VJ = Specific Device Code
Y = Production Year (last digit)
M = Production Month: 1−9, A, B, C
PIN CONNECTIONS
V1
V2/VDD
V3
1
(Top View)
RESET
GND
V4
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Figure 1. Typical Application Circuit
© Semiconductor Components Industries, LLC, 2010
March, 2010 − Rev. 1
1
Publication Order Number:
CAT8710/D
1 page  
CAT8710
Detailed Description
The CAT8710 is a space-saving, low-power, quad voltage
microprocessor supervisory circuit designed to monitor 4
voltage supplies. The CAT8710 has 2 factory preset
thresholds for monitoring standard power supply voltages of
3.3 V, 3.0 V, 2.5 V, or 1.8 V, and 2 adjustable thresholds for
monitoring voltages as low as 0.62 V.
Each internal voltage comparator has a typical hysteresis
of 0.3% with respect to its reset threshold, which improves
immunity to ambient noise without significantly reducing
threshold accuracy. CAT8710 is designed to ignore short
transients.
Applications Information
Reset Output
CAT8710 provides an extended reset signal 120 ms (typ)
in duration. The output is open drain and requires an external
pull-up resistor to an external power supply. This supply can
be less than or greater than VDD, but should not exceed
5.5 V. When the external pull−up voltage is greater than
VDD reverse current flow from the external pull−up voltage
to VDD is prevented by CAT8710’s internal circuitry.
The CAT8710 is powered by VDD, which is also a
monitored voltage. When any supply drops below its
threshold, the reset output asserts low and remains low as
long as VDD is above 1.0 V.
www.DataSheet4U.com
Adjustable Thresholds
CAT8710 allows users to create 2 custom voltage
thresholds. The threshold voltage at each adjustable input is
typically 0.62 V. Monitoring of voltages greater than 0.62 V
requires a resistor-divider network to be connected to the
circuit (Figure 11).
VIN + 0.62 V
(R1 ) R2)
R2
or, written in terms of R1:
ǒ ǓR1 + R2
VIN
0.62 V
*
1
Because the CAT8710 has a guaranteed input current of
less than 50 nA on the adjustable inputs, resistor values up
to 1000 kW can be used for R2 with < 1% error.
Unused Inputs
Connect unused monitor inputs to a supply voltage greater
in magnitude than their specified threshold voltages; use
VDD for normal operation (device power−supply pin). Do
not connect unused monitor inputs to ground or allow them
to float.
Adding Manual Reset Capability
Figure 12 illustrates how to add manual reset to the
CAT8710. Depressing the pushbutton switch short−circuits
the analog input to ground and initiates a RESET pulse. This
technique can be used on either the V1 or V4 inputs. The
switch must be open for at least 120 ms in order to deassert
the RESET output. No external switch debounce is required.
A small capacitor across R2 will improve noise immunity
when using long leads from the pushbutton switch to the
adjustable input.
Figure 9. RESET Output Timing Diagram
3.3 V
CAT8710
V1MON
V2/VDD
RESET
V3
V4MON
GND
5V
mP
RESET
POR
Applying power to the CAT8710 activates a POR circuit
which activates the reset output (active LOW). At power−up
POR prevents the system microprocessor from starting to
operate with insufficient voltage and prior to stabilization of
the clock oscillator. It ensures that operation is precluded
until internal registers are properly loaded, FPGA’s have
downloaded their configuration data. The reset signal
remains active until all monitored power supplies have risen
above their minimum preset voltage levels.
Power−Supply Bypassing
All monitored inputs are immune to short supply
transients. For applications where higher immunity is
required, connect a 0.1 mF bypass capacitor from each input
pin to ground very close to CAT8710’s package.
Figure 10. Interfacing to Different Logic−Supply
Voltage
http://onsemi.com
5
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet CAT8710.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CAT871 | Dual Input Reset Generator | ON Semiconductor |
| CAT8710 | Quad-Voltage Supervisor | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |