DataSheet.es    


PDF IP3338CX24 Data sheet ( Hoja de datos )

Número de pieza IP3338CX24
Descripción 10-channel integrated LC-filter network
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de IP3338CX24 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! IP3338CX24 Hoja de datos, Descripción, Manual

IP3338CX24
www.DataSheet4U.com
10-channel integrated LC-filter network with ESD input
protection to IEC 61000-4-2 level 4
Rev. 02 — 10 March 2009
Product data sheet
1. Product profile
1.1 General description
The IP3338CX24 is a 10-channel1 LC low-pass filter network designed to filter undesired
RF signals in the 800 MHz to 3000 MHz frequency band. In addition, the IP3338CX24
incorporates diodes which protect downstream components from ElectroStatic Discharge
(ESD) voltages as high as 15 kV.
The IP3338CX24 is fabricated using monolithic silicon technology and integrates
10 inductors and 20 back-to-back diodes in a single Wafer-Level Chip-Scale Package
(WLCSP) measuring 2.11 mm by 2.11 mm (typical). These features make the
IP3338CX24 ideal for use in applications requiring the utmost in miniaturization such as
mobile phone handsets, cordless telephones and personal digital devices.
1.2 Features
I Pb-free, RoHS compliant and halogen free package; Dark Green compliant
I Integrated 10-channel π-type LC filter network with 60 nH channel inductance
I 125 series resistance; 25 pF (typical) capacitance per line
I Integrated ESD protection withstanding ±15 kV contact discharge, far exceeding
IEC 61000-4-2, level 4
I WLCSP with 0.4 mm pitch
1.3 Applications
I Cellular and Personal Communication System (PCS) mobile handsets
I Cordless telephones
I Wireless data (WAN/LAN) systems
I PDAs
1. Also available as a 7-channel device (IP3337CX18).

1 page




IP3338CX24 pdf
NXP Semiconductors
IP3338CX24
www.DataSheet4U.com
10-channel integrated LC-filter network with ESD input protection
0
αil
(dB)
10
20
30
40
50
60
70
101
1
10 102
(1) Channel 1 (pins A2 and A5).
(2) Channel 9 (pins E2 and E5).
(3) Channel 4 (pins B1 and B4).
Fig 4. Measured frequency response curves
001aai760
(3)
(2)
(1)
103 104
f (MHz)
7.2 Crosstalk
The setup for measuring crosstalk in a 50 system is shown in Figure 5.
IN_1
50
IN_2
Vgen
50
DUT
TEST BOARD
OUT_2
OUT_1
50
50
Fig 5. Crosstalk measurement configuration
001aai756
The crosstalk between adjacent channels within the IP3338CX24 for different channel
pairs measured in a 50 NetWork Analyzer (NWA) system, is shown in Figure 6. In all
cases, all unused connections are terminated with 50 to ground.
IP3338CX24_2
Product data sheet
Rev. 02 — 10 March 2009
© NXP B.V. 2009. All rights reserved.
5 of 12

5 Page





IP3338CX24 arduino
NXP Semiconductors
IP3338CX24
www.DataSheet4U.com
10-channel integrated LC-filter network with ESD input protection
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
IP3338CX24_2
Product data sheet
Rev. 02 — 10 March 2009
© NXP B.V. 2009. All rights reserved.
11 of 12

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet IP3338CX24.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IP3338CX2410-channel integrated LC-filter networkNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar