|
|
PDF PESDxS4UD Data sheet ( Hoja de datos )
| Número de pieza | PESDxS4UD | |
| Descripción | Quadruple ESD protection diode arrays | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PESDxS4UD (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
PESDxS4UD series
Quadruple ESD protection diode arrays in a SOT457 package
Rev. 01 — 4 July 2006
Product data sheet
1. Product profile
1.1 General description
Quadruple ElectroStatic Discharge (ESD) protection diode arrays in a SOT457 (SC-74)
small Surface-Mounted Device (SMD) plastic package designed to protect up to 4 signal
lines from the damage caused by ESD and other transients.
www.DataSheet4U.com 1.2 Features
I ESD protection of up to 4 lines
I Max. peak pulse power: PPP = 200 W
I Ultra low leakage current: IRM = 50 pA
I Low clamping voltage: VCL = 12 V at
IPP = 20 A
I ESD protection up to 30 kV
I IEC 61000-4-2; level 4 (ESD)
I IEC 61000-4-5; (surge); IPP up to 20 A
1.3 Applications
I Computers and peripherals
I Audio and video equipment
I Cellular handsets and accessories
I Communication systems
I Portable electronics
I Subscriber Identity Module (SIM) card
protection
1.4 Quick reference data
Table 1. Quick reference data
Symbol Parameter
Per diode
VRWM
reverse standoff voltage
PESD3V3S4UD
PESD5V0S4UD
PESD12VS4UD
PESD15VS4UD
PESD24VS4UD
Conditions
Min Typ Max Unit
- - 3.3 V
- - 5V
- - 12 V
- - 15 V
- - 24 V
1 page  
Philips Semiconductors
PESDxS4UD series
Quadruple ESD protection diode arrays in a SOT457 package
www.DataSheet4U.com
Table 8. Characteristics …continued
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
Min Typ Max Unit
Cd diode capacitance
PESD3V3S4UD
f = 1 MHz; VR = 0 V
- 215 300 pF
PESD5V0S4UD
- 165 220 pF
PESD12VS4UD
- 73 100 pF
PESD15VS4UD
- 60 90 pF
PESD24VS4UD
- 45 70 pF
VCL clamping voltage
PESD3V3S4UD
IPP = 1 A
IPP = 20 A
PESD5V0S4UD
IPP = 1 A
IPP = 20 A
PESD12VS4UD
IPP = 1 A
IPP = 10 A
PESD15VS4UD
IPP = 1 A
IPP = 6 A
PESD24VS4UD
IPP = 1 A
IPP = 4 A
rdif
differential resistance
IR = 5 mA
[1][2]
- - 8V
- - 12 V
- - 8V
- - 13 V
- - 17 V
- - 24 V
- - 22 V
- - 33 V
- - 33 V
- - 52 V
- - 25 Ω
[1] Non-repetitive current pulse 8/20 µs exponential decay waveform according to IEC 61000-4-5.
[2] Measured from pin 1, 3, 4 or 6 to 2 or 5
104
PPP
(W)
103
102
10
006aaa698
1.2
PPP
PPP(25°C)
0.8
0.4
001aaa633
1
1 10 102 103 104
tp (µs)
Tamb = 25 °C
Fig 3. Peak pulse power as a function of exponential
pulse duration; typical values
0
0 50 100 150 200
Tj (°C)
Fig 4. Relative variation of peak pulse power as a
function of junction temperature; typical values
PESDXS4UD_SER_1
Product data sheet
Rev. 01 — 4 July 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
5 of 12
5 Page 
Philips Semiconductors
PESDxS4UD series
Quadruple ESD protection diode arrays in a SOT457 package
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.semiconductors.philips.com.
www.DataSheet4U.com
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Philips Semiconductors
sales office. In case of any inconsistency or conflict with the short data sheet,
the full data sheet shall prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
malfunction of a Philips Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Philips Semiconductors accepts no liability for inclusion and/or use
of Philips Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — Philips Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.semiconductors.philips.com/profile/terms, including those
pertaining to warranty, intellectual property rights infringement and limitation
of liability, unless explicitly otherwise agreed to in writing by Philips
Semiconductors. In case of any inconsistency or conflict between information
in this document and such terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
11.4 Trademarks
Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]
PESDXS4UD_SER_1
Product data sheet
Rev. 01 — 4 July 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet PESDxS4UD.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PESDxS4UD | Quadruple ESD protection diode arrays | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |