|
|
Número de pieza | MAX11504 | |
Descripción | Standard-Definition Video Filter | |
Fabricantes | Maxim Integrated Products | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAX11504 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! 19-1057; Rev 0; 11/07
Four-Channel, Standard-Definition
Video Filter
General Description
The MAX11504/MAX11505 integrated filters offer four
channels of 5th order filters for standard-definition video
and include +6dB output buffers on each channel. These
video filters are ideal for anti-aliasing and DAC smooth-
ing in applications such as set-top boxes, security sys-
tems, digital video recorders (DVRs), DVD players, and
personal video recorders.
The MAX11504/MAX11505 video inputs feature a trans-
parent clamp compatible with AC- and DC-coupled
www.DiantpauStheseigtn4Ua.lcsoamnd allow DAC outputs to be directly cou-
pled. The 5th order filters provide a bandwidth of
8.6MHz (typical). The MAX11504 offers a flat passband
response on all channels. The MAX11505 offers a 0.8dB
peaking passband response on Channel 1, resulting in
a bandwidth of 8.9MHz (typical) and a flat passband
response on all other channels.
Each channel includes an output buffer with a gain of
+6dB capable of driving a full 2VP-P video signal into two
standard 150Ω (75Ω back terminated) video loads. The
buffers drive either AC- or DC-coupled loads and assure
a blanking level below 1V after the back-match resistor.
The MAX11504/MAX11505 operate from a single +5V
supply and are available in the 0°C to +70°C commer-
cial temperature range. These devices are available in
small 10-pin µMAX® packages.
Applications
Set-Top Box Receivers
Digital Video Recorders (DVRs)
Security Video Systems
SDTV
DVD Players
Personal Video Recorders
Video On-Demand
µMAX is a registered trademark of Maxim Integrated Products,
Inc.
Pin Configuration
TOP VIEW
IN1 1
IN2 2
IN3 3
IN4 4
VCC 5
MAX11504
MAX11505
10 OUT1
9 OUT2
8 OUT3
7 OUT4
6 GND
µMAX
Features
♦ Four-Channel 5th Order Filter for Standard-
Definition Video
♦ +6dB Output Buffers
♦ Transparent Input Clamp
♦ AC- or DC-Coupled Inputs
♦ AC- or DC-Coupled Outputs
♦ Output Buffers Can Drive Two Standard 150Ω
Video Loads
♦ 12kV HBM ESD Protection on Outputs
♦ Flat Passband Response (MAX11504)
♦ 0.8dB Peaking Passband Response on Channel 1
(MAX11505)
♦ Single +5V Power Supply
♦ Small 10-Pin µMAX Package
Ordering Information
PART
PIN-
PACKAGE FREQUENCY
PACKAGE
CODE
RESPONSE
MAX11504CUB+ 10 µMAX
U10+2
Flat
MAX11505CUB+ 10 µMAX
U10+2
HF Boost On
Channel 1
Note: All devices are specified over the 0°C to +70°C commer-
cial temperature range.
Simplified Block Diagram
VCC
MAX11504
MAX11505
IN1
TRANSPARENT
CLAMP
8.6MHz
8.9MHz*
+6dB
OUT1
IN2
TRANSPARENT
CLAMP
8.6MHz
+6dB
OUT2
IN3
TRANSPARENT
CLAMP
8.6MHz
+6dB
OUT3
IN4
TRANSPARENT
CLAMP
8.6MHz
+6dB
OUT4
GND
*MAX11505 WITH 0.8dB PEAKING ON CHANNEL 1
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1 page Four-Channel, Standard-Definition
Video Filter
PIN NAME
1 IN1
2 IN2
3 IN3
4 IN4
5 VCC
6 GND
www.DataShe7et4U.com OUT4
8 OUT3
9 OUT2
10 OUT1
Pin Description
FUNCTION
Video Input Channel 1. The MAX11505 provides 0.8dB passband boost at high frequency.
Video Input Channel 2
Video Input Channel 3
Video Input Channel 4
Power Supply. Bypass to ground with 0.1µF and 1µF capacitors.
Ground
Video Output Channel 4
Video Output Channel 3
Video Output Channel 2
Video Output Channel 1. The MAX11505 provides 0.8dB passband boost at high frequency.
Detailed Description
Each channel of the MAX11504/MAX11505 contains a
transparent input clamp, a 5th order lowpass filter, and
an output amplifier with +6dB gain (see the Functional
Diagrams and Typical Operating Circuits). The 5th order
lowpass filters provide a bandwidth of 8.6MHz (typical).
The MAX11504 provides a flat passband response. The
MAX11505 features a 0.8dB high-frequency boost on
Channel 1 to help with system rolloff (for CVBS signals)
and a flat passband response on all other channels.
Within the passband, each channel amplifies the signal
by two and adds 280mV of offset.
VOUT = (2 × VIN) + 0.28V
Typical voltage levels are shown in Figures 1 and 2.
2.28V
1.00V
INPUT SIGNAL
0.30V
0V
Figure 1. Typical AC-Coupled Signal
MAX11504
MAX11505
IN_ OUT_
0.88V
0.28V
OUTPUT SIGNAL
_______________________________________________________________________________________ 5
5 Page Four-Channel, Standard-Definition
Video Filter
Functional Diagrams and Typical Operating Circuits (continued)
ANTI-ALIASING FILTER APPLICATION
www.DataSheet4U.com
0.1µF*
IN1 1
75Ω
0.1µF*
IN2 2
75Ω
0.1µF*
IN3 3
75Ω
0.1µF*
IN4 3
75Ω
+5V
CLAMP
VCC
4
0.1µF
1µF
MAX11504
MAX11505
8.6MHz
8.9MHz✝
+6dB 8 OUT1 75Ω
CLAMP
8.6MHz
7 OUT2 75Ω
+6dB
CLAMP
8.6MHz
+6dB 6 OUT3 75Ω
CLAMP
8.6MHz
5
6 OUT4 75Ω
+6dB
*OPTIONAL
✝MAX11505 WITH 0.8dB PEAKING ON CHANNEL 1
GND
MULTICHANNEL
DECODER
ADC
75Ω
ADC
75Ω
ADC
75Ω
ADC
75Ω
PROCESS: BiCMOS
Chip Information
______________________________________________________________________________________ 11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet MAX11504.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAX1150 | 8-Bit / 500Msps Flash ADC | Maxim Integrated |
MAX11500 | High-Definition Video Filter | Maxim Integrated |
MAX11504 | Standard-Definition Video Filter | Maxim Integrated Products |
MAX11505 | Standard-Definition Video Filter | Maxim Integrated Products |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |