DataSheet.es    


PDF CX-48x Data sheet ( Hoja de datos )

Número de pieza CX-48x
Descripción COMPACT PHOTOELECTRIC SENSOR
Fabricantes Sunx 
Logotipo Sunx Logotipo



Hay una vista previa y un enlace de descarga de CX-48x (archivo pdf) en la parte inferior de esta página.


Total 24 Páginas

No Preview Available ! CX-48x Hoja de datos, Descripción, Manual

231
FIBER
SENSORS
LASER
SENSORS
PPHHOOTTOOEELLEECCTTRRIICC
SSEENNSSOORRSS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
Compact Photoelectric Sensor Amplier Built-in
CX-400 SERIES
www.DataSheet4U.com
Related Information
General terms and conditions............. P.1
MS-AJ / CHX-SC2..............P.799 / P.800
Korea’s S-mark ........................... P.1034~
Sensor selection guide......P.11~ / P.229~
Glossary of terms / General precautions....P.983~ / P.986~
Conforming to
EMC Directive
UL Recognition
Certified
(Some models only)
SUNX website http://www.sunx.com
World standard photoelectric sensors
Full line up 116 models!
PNP output Light intensity Interference
type available monitor
prevention
Selection
Guide
Amplifier
Built-in
CX-400
EX-10
EX-20
EX-30
EX-40
EQ-30
EQ-500
MQ-W
RX-LS200
RX
CY
PX-2
RT-610
Power Supply
Built-in
NX5
VF
Amplifier-
separated
SU-7 / SH
SS-A5 / SH
Other
Products
Wide variety of 116 models
You can nd your desired sensors among the CX-400
series because of their high basic performance, superior
cost performance, and wide variation of types.
Type
Sensing range
Thru-beam (long sensing range)
15 m 49.213 ft
Thru-beam
10 m 32.808 ft
Retroreflective (long sensing range)
5 m 16.404 ft
Retroreflective (with polarizing filters)
3 m 9.843 ft
Retroreflective (for transparent object sensing)
0.1 to 2 m 0.328 in 6.562 in
Retroreflective (for transparent object sensing)
50 to 500 mm 1.969 to 19.685 in
Diffuse reflective (800 mm 9.843 in type)
800 mm 9.843 in
Diffuse reflective (300 mm 11.811 in type) 300 mm 11.811 in
Diffuse reflective (100 mm 3.937 in type) 100 mm 3.937 in
Diffuse reflective (narrow-view type) 70 to 200 mm 2.756 to 7.874 in
Adjustable range reflective 20 to 300 mm 0.787 to 11.811 in
Adjustable range reflective 15 to 100 mm 0.591 to 3.937 in
Adjustable range reflective 2 to 50 mm 0.079 to 1.969 in
Adjustable range reflective (small spot) 2 to 50 mm 0.079 to 1.969 in
Output
NPN, PNP
Connecting method (Note 1) Cable type, M8 Plug-in connector type, M12 Pigtailed type
Cable length of cable type (Note 2) 0.5 m 1.640 ft, 2 m 6.562 ft, 5 m 16.404 ft
Notes: 1) The adjustable range reective type includes the cable type
and M8 connector type only.
2) The adjustable range reective type includes the 2 m 6.562 ft
cable type (standard) only.
Strong against oil and coolant liquids CX-41/42/49
The lens material for
the thru-beam type,
retroreective type
(excluding the CX-48)
and the diffuse reective
type are made of a strong
acrylic that resists the
harmful effects of coolants.
These sensors can be
used with condence even
around metal processing
machinery that disperses
oil mists. The protection mechanism also conforms to
IP67 (IEC).
Strong against ethanol
A strong, ethanol resistant
polycarbonate was used for the
front and display covers.
Safe even for installing near
food processing machinery
that disperses ethanol based
detergents. The protection
mechanism also conforms to IP67
(IEC).
CX-44/48
Caution: Set the CX-48so that cleaning liquid will not get on to the
attached reector.

1 page




CX-48x pdf
235
CX-400Compact Photoelectric Sensor
SERIES
FIBER
SENSORS
LASER
SENSORS
PPHHOOTTOOEELLEECCTTRRIICC
SSEENNSSOORRSS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
Selection
Guide
Amplifier
Built-in
CX-400
EX-10
EX-20
EX-30
EX-40
EQ-30
EQ-500
MQ-W
RX-LS200
RX
CY
PX-2
RT-610
Power Supply
Built-in
NX5
VF
Amplifier-
separated
SU-7 / SH
SS-A5 / SH
Other
Products
www.DataSheet4U.com
FUNCTIONS
BGS / FGS functions make even the most challenging settings possible!
CX-44
For details on the operation of the BGS / FGS functions, refer to p.249, “BGS / FGS functions” of “PRECAUTIONS
FOR PROPER USE”.
The BGS function is best suited for the following case
Background not present
When object and background are separated
BGS
Not affected if the background
color changes or someone
passes behind the conveyor.
The FGS function is best suited for the following case
Background present
When object and background are close together
When the object is glossy or uneven
FGS
Unaffected by gloss, color or
uneven surfaces when sensing
objects present on a conveyor belt.
BGS (Background suppression) function
The sensor judges that an object is present when light
is received at position A of the light-receiving element
(2-segment element).
This is useful if the object and background are far
apart. The distance adjustment method is the same as
the conventional adjustment method for adjustable
range reflective type sensors.
OFF
Light received at
element B, or
light not received
ON
(Light received at element A)
Element A
Moving object
in the back
Object
Setting distance
Element B
FGS (Foreground suppression) function
The sensor judges that an object is present when no light is
received at position B of the light-receiving element (2-
segment element). Accordingly, even objects that are glossy
can be sensed. This is useful if the object and background
are close together, or if the object being sensed is glossy.
OFF in this condition only
ON in all other conditions
Object absent
OFF
A
Object present
ON
For glossy object
ON
B
Lens
Emitting
element
Conveyor
Light received
at position B
A conveyor or
other back-ground
must be present
Conveyor
Light received at
position A
Setting
distance
Conveyor
Light is not received
at position B, so a
object is judged to
be present
Strong against interference
The interference prevention function lets two sensors to
be mounted close together precisely.
Interference
prevention
filter (Optional)
Retroreflective type
Diffuse reflective type
Adjustable range reflective type
Thru-beam type
Only CX-411
Automatic
interference
prevention function
OTHERS
Less resources used
Based on environmental
considerations, simplied
packaging is used in order
to reduce waste.
In addition, the bag is
made from polyethylene
which produces no toxic
gases even when burned.

5 Page





CX-48x arduino
241
CX-400Compact Photoelectric Sensor
SERIES
www.DataSheet4U.com
FIBER
SENSORS
SPECIFICACTIONS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
Type
NPN output
Item PNP output
Adjustable range (Note 2)
Sensing range (with white non-glossy paper)
Small spot
Adjustable range reective
CX-441
CX-443
CX-444
CX-442
CX-441-P
CX-443-P
CX-444-P
CX-442-P
20 to 50 mm 0.787 to 1.969 in
20 to 100 mm 0.787 to 3.937 in 40 to 300 mm 1.575 to 11.811 in
2 to 50 mm 0.079 to 1.969 in
15 to 100 mm 0.591 to 3.937 in 20 to 300 mm 0.787 to 11.811 in
SAFETY
COMPONENTS
Hysteresis
2 % or less of operation distance (with white non-glossy paper)
5 % or less of operation distance
(with white non-glossy paper)
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
Repeatability
Supply voltage
Current consumption
Output
Output operation
Short-circuit protection
Response time
Operation indicator
Stability indicator
Distance adjuster
Sensing mode
Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
25 mA or less
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1 V or less (at 100 mA source current)
0.4 V or less (at 16 mA source current)
Switchable either Detection-ON or Detection-OFF
Incorporated
1 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
5-turn mechanical adjuster
BGS / FGS functions Switchable with wiring of sensing mode selection input
Automatic interference
prevention function (Note 3)
Incorporated
Selection
Guide
Amplifier
Built-in
CCX-400
EX-10
EX-20
EX-30
EX-40
EQ-30
EQ-500
MQ-W
RX-LS200
RX
CY
PX-2
RT-610
Power Supply
Built-in
NX5
Protection
IP67 (IEC) (Refer to p.984 for details of standards.)
Ambient temperature
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed ), Storage: –30 to +70 °C –22 to +158 °F
Ambient humidity
35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance
Incandescent light: 3,000 x at the light-receiving face
EMC
EN 60947-5-2
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
Shock resistance
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Spot diameter
ø2 mm ø0.079 in approx.
ø6.5 mm ø0.256 in approx. ø9 mm ø0.354 in approx.
15 mm 0.591 in approx.
(at 50 mm 1.969 in distance) (at 50 mm 1.969 in distance) (at 100 mm 3.937 in distance) (at 300 mm 11.811 in distance)
Material
Enclosure: PBT (Polybutylene terephthalate), Front cover: Polycarbonate, Indicator cover: Polycarbonate
Cable
0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight
Net weight: 55 g approx., Gross weight: 80 g approx.
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an
ambient temperature of +23 °C +73.4 °F.
2) The adjustable range stands for the maximum sensing range which can be set with the distance
adjuster. The sensor can detect an object 2 mm 0.079 in [CX-444(-P): 15 mm 0.591 in, CX-442(-P):
20 mm 0.787 in], or more, away.
3) Note that detection may be unstable depending on the mounting conditions or the sensing
object. In the state that this product is mounted, be sure to check the operation with the actual
sensing object.
Actual sensing range
of the sensor: A
Adjustable range: B
Sensing
object
VF
Amplifier-
separated
SU-7 / SH
SS-A5 / SH
Other
Products
CX-441/443CX-444CX-442
A
2 to 50 mm 15 to 100 mm 20 to 300 mm
0.079 to 1.969 in 0.591 to 3.937 in 0.787 to 11.811 in
B
20 to 50 mm 20 to 100 mm 40 to 300 mm
0.787 to 1.969 in 0.787 to 3.937 in 1.575 to 11.811 in

11 Page







PáginasTotal 24 Páginas
PDF Descargar[ Datasheet CX-48x.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CX-48xCOMPACT PHOTOELECTRIC SENSORSunx
Sunx

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar