|
|
Número de pieza | TA1310N | |
Descripción | DISTORTION COMPENSATION IC | |
Fabricantes | Toshiba Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TA1310N (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! TENTATIVE
TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT
SILICON MONOLITHIC
TA1310N
NTSC VIDEO, CHROMA, DEFLECTION, AND DEC. DISTORTION
COMPENSATION IC (FOR YUV INTERFACE)
TA1310N is Video Chroma and deflection signal.
Processing IC for NTSC. On a 56-pin shrink DIP package.
TA1310N has deflection distortion compensation.
TA1310N uses an I2C Bus controls for controllings and
settings.
TA1310N
FEATURES
Video Signal Processing
Built-in Y delay line
Black stretch
DC restoration ratio compensation
Aperture controlled sharpness
Output for velocity scan modulation (VSM)
White peak suppression (WPS)
Chroma Signal Processing
Built-in chroma BPF / TOF
R-Y and B-Y outputs
Color / BW situation output by read bus
Text Signal Processing
Analog RGB inputs
Digital RGB inputs
Halftone switch (YM)
Cutoff and drive alignment
YUV inputs
Weight: 5.55 g (Typ.)
Sync Signal Processing
Counts down 32 fH
Dual AFC
Vertical AGC
HD and VD outputs
Vertical frequency fixed mode
Horizontal and Vertical position alignment
DC outputs for vertical centering
Deflection Correction Function
Horizontal and Vertical amplitude adjustment
Vertical linearity correction
Vertical S correction
Vertical EHT correction
E / W parabola correction
E / W corner correction
E / W trapezium correction
1 2004-02-20
1 page PIN
No.
SYMBOL
FUNCTION
20 NOISE FILTER Connect to GND with a
0.47-µF coupling
capacitor.
21 V Centering The terminal for the DAC
output that controlled by
BUS (V-center).
INTERFACE
TA1310N
I / O SIGNAL
22
EW FB
The terminal for E / W
feedback.
23 EW OUT The terminal for output of
E / W drive signal.
24
V OUT
The terminal for output of
Vertical drive signal.
25
V NFB
The terminal for input of
Vertical negative
feedback. If input voltage
is less than 2 V, V-Guard
function works and blanks
RGB signal output.
5 2004-02-20
5 Page PIN
No.
SYMBOL
FUNCTION
51 VCC (5 V) The terminal for VCC
supply 5 V.
52
R-Y IN
The terminals for the R-Y
53
B-Y IN
/ B-Y signal input.
Input signals clamped by
coupling capacitors.
(*) Even when not in use,
connect to GND with a
coupling capacitor.
54
Y IN
The terminal for the Y
signal input.
Input the Y signals
clamped by coupling
capacitors.
55 BLACK PEAK The terminal to be
DET
connected the filter
controlling the black
stretching gain of the
black stretching circuit.
The black stretching gain
varies depending on the
voltage at this pin.
56 DC The terminal to be
RESTORATION connected capacitor for
CORR.
DC restoration correction
control.
Open this pin if not use
the DC restoration
correction.
INTERFACE
―
TA1310N
I / O SIGNAL
11 2004-02-20
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet TA1310N.PDF ] |
Número de pieza | Descripción | Fabricantes |
TA1310A | SAW Filter 1586.360MHz | Golledge Electronics |
TA1310A | SAW Filter 1588.655 MHz | TAI-SAW TECHNOLOGY |
TA1310AN | NTSC Video / Chroma / Deflection and Distorition Compensation IC | Toshiba America Electronic |
TA1310ANG | NTSC Video / Chroma / Deflection and Distorition Compensation IC | Toshiba America Electronic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |