|
|
PDF LC83025E Data sheet ( Hoja de datos )
| Número de pieza | LC83025E | |
| Descripción | Digital Signal Processor for Karaoke Products | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC83025E (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
Ordering number : EN4977A
CMOS LSI
LC83025E
Digital Signal Processor
for Karaoke Products
Overview
The LC83025E is a special-purpose karaoke DSP that
implements the signal processing required by karaoke
systems, including pitch shift, microphone echo, voice
muting and simple surround, with only a single 256Kb
external DRAM. Since the LC83025E includes built-in
A/D and D/A converters, it can also handle analog inputs
and outputs in addition to digital inputs and outputs. The
LC83025E uses serial transfer of coefficient data from a
microcontroller to handle changes in functions and
characteristics required for each application.
Features
• Applications
— Pitch shift
The LC83025E can shift the music pitch or the
microphone pitch by ±15 steps in 1/4 interval steps,
or ±1 octave in scale tone steps according to
command data sent from the microcontroller.
Furthermore, the pitch can be changed up to ±1
octave in arbitrary steps by setting internal
coefficients.
— Microphone echo
The LC83025E implements echo processing for the
signal input from the microphone A/D converter.
The amount of echo, the delay time and other
parameters can be changed by setting coefficients.
— Voice mute
The LC83025E implements processing that removes
monaural signal components included in the music
signal. This allows CDs with vocals to be used as
karaoke CDs. Command data is used to turn the
voice mute function on or off.
— Simple surround
The LC83025E implements a simple surround
function by adding delayed components to the music
signal. The LC83025E includes six sets of simple
surround coefficients as built-in preset data. These
values can be switched by sending command data.
Applications can implement their own original
surround effects by setting the coefficients.
However, the algorithm itself is fixed.
— Flexible input mixing
The LC83025E supports hybrid mixing of digital
and analog left and right channel song inputs, and
thus can handle a wide range of disk processing
configurations.
• Audio inputs and outputs
— Inputs: Digital - One system (stereo)
A/D converter - Three channels
— Outputs: Digital - One system (stereo)
D/A converter - Two channels
— A/D converter
Second order ∆∑ modulation - Three channels
— D/A converter
4× oversampling digital filters
plus second order noise shaper
plus 5-bit PWM system - Two channels
• Master clock: 768 fs
• External memory: Up to two 256K (64K × 4-bit)
DRAMs can be used
• Microcontroller input: Synchronous 8-bit serial data
• Supply voltage: 5 V single-voltage
• Package: QFP80E
Package Dimensions
unit: mm
3174-QFP80E
[LC83025E]
SANYO: QFP80E
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
62896HA (OT)/63095HA (OT) No. 4977-1/15
1 page  
LC83025E
Continued from preceding page.
Pin No.
Symbol
[Power supply pins]
12, 26,
53, 72
VDD
15, 16,
54, 73
VSS
36 ADLVDD
41 ADRVDD
46 ADMVDD
29 DALVDD
32 DARVDD
34 ADLVSS
39 ADRVSS
44 ADMVSS
27 DALVSS
30 DARVSS
I/O Function
—
VDD for the digital block (Connect to +5 V.)
(Keep connections as short as possible so that potential differences between the VDD pins do not occur.)
—
VSS for the digital block (Connect to ground.)
(Keep connections as short as possible so that potential differences between the VSS pins do not occur.)
— A/D converter VDD (left channel) (Connect to +5 V.)
— A/D converter VDD (right channel) (Connect to +5 V.)
Design the application wiring so
that potential differences do not
— A/D converter VDD (microphone) (Connect to +5 V.)
— D/A converter VDD (left channel) (Connect to +5 V.)
— D/A converter VDD (right channel) (Connect to +5 V.)
occur between the analog VDD
pins and between the digital VDD
group and the analog VDD group.
— A/D converter VSS (left channel) (Connect to ground.)
— A/D converter VSS (right channel) (Connect to ground.)
Design the application wiring so
that potential differences do not
— A/D converter VSS (microphone) (Connect to ground.)
— D/A converter VSS (left channel) (Connect to ground.)
— D/A converter VSS (right channel) (Connect to ground.)
occur between the analog VSS
pins and between the digital VSS
group and the analog VSS group.
No. 4977-5/15
5 Page 
LC83025E
Figure 8 Timing for Data Output to External DRAM
Figure 9 Sample A/D Converter External Circuit
No. 4977-11/15
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet LC83025E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC83025 | Digital Signal Processor for Karaoke Products | Sanyo Semicon Device |
| LC83025E | Digital Signal Processor for Karaoke Products | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |