|
|
Número de pieza | LC7583N | |
Descripción | LCD Driver with Level Meter | |
Fabricantes | Sanyo Semicon Device | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LC7583N (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! Ordering number:ENN2292B
CMOS IC
LC7583N
LCD Driver with Level Meter
Overview
The LC7583N is an LCD driver that can be microcomputer-
controlled to provide segment display and level meter dis-
play.
Features
• The serial data address is “5”.
• 1/2duty, 1/2bias, 66 segments (max) (Except ADC out-
put, DSP input display).
• 5-bit AD converter and three selections of level output
shown below.
(1) 13 dots x 2ch Log scale
(2) 13 dots x 2ch Linear scale
(3) 26 dots x 1ch Linear scale
• 2 display (DSP) pins for direct display.
• Microcomputer-controlled data input using 3 pins for se-
rial data input and control.
• The full scale of the AD converter is 31/48Vref. The Vref
is variable (with Vref pin).
• Available for increased use in general-purpose applica-
tions because no decoder is required to display the seg-
ment data.
• Control bits used to cause the segment output and AD
output to be lighted/unlighted.
• RES pin used to cause the initial mode to be entered.
Package Dimensions
unit:mm
3057-QIP64A
[LC7583N]
20.0
14.0
1.0 0.8
0.35
48
49
3.0
1.0 0.15
33
32
64
1
17
16
2.15
unit:mm
3026B-QIP64B
1.0
48
49
16.6 1.7 SANYO : QIP64A
[LC7583N]
19.6
14.0
0.8 0.35
2.8
1.0
33
32
64
1
17
16
SANYO : QIP64B
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
62001TN (KT)/N111JN/3168KI/N266AT, TS No.2292–1/9
1 page LC7583N
ADC Display Mode
2ch (stereo) Display (shown for one channel only)
Lighting Level for Log Display
Display
Output
dB Display
(dB)
Display
Output
dB Display
(dB)
AD1
–20.0
AD8
0.0
AD2
–14.0
AD9
1.0
AD3
–10.5
AD10
3.0
AD4
–8.0
AD11
5.0
AD5
–4.5
AD12
8.0
AD6
–3.0
AD13
10.0
AD7
–1.0
Note) The conversion error of the AD converter is ±1/2LSB.
When 0dB is taken as 1V (at Vref=4.95V), a conversion error of
approximately ±3.5dB occurs at –20dB.
COMMON Connection
No.2292–5/9
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet LC7583N.PDF ] |
Número de pieza | Descripción | Fabricantes |
LC75832E | General-Purpose LCD Display Driver | ON Semiconductor |
LC75832E | General-Purpose LCD Display Driver | Sanyo |
LC75832W | General-Purpose LCD Display Driver | ON Semiconductor |
LC75832W | General-Purpose LCD Display Driver | Sanyo |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |