DataSheet.es    


PDF LC75281 Data sheet ( Hoja de datos )

Número de pieza LC75281
Descripción Parametric Equalizer System
Fabricantes Sanyo Semicon Device 
Logotipo Sanyo Semicon Device Logotipo



Hay una vista previa y un enlace de descarga de LC75281 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! LC75281 Hoja de datos, Descripción, Manual

Ordering number : EN5913
CMOS IC
LC75281E
Parametric Equalizer System
Overview
The LC75281E is a four-band stereo parametric equalizer.
A parametric equalizer is a fully general equalizer that
allows all three parameters that define an equalizer’s
characteristics, i.e., the center frequency, gain, and Q, to
be set independently.
Functions
• Four-band (low, low mid, high mid, and high) left and
right channels parametric equalizer
• For each band:
Center frequency: 11 positions
Gain: 13 positions in ±2dB steps
Q: Variable over 8 positions
• The center frequency, gain, and Q control settings are
set using serial data input in the CCB format.
Features
• A parametric equalizer with the following features can
be implemented with just two ICs: this IC and a
microcontroller.
• The center frequency, gain, and Q can be controlled by a
single operation.
• Memory recall by a single operation can be implement-
ed using preset values.
• Either shelving or peaking characteristics can be
selected for the low band.
Package Dimensions
unit: mm
3159-QFP64E
[LC75281E]
SANYO: QFP64E (QIP64E)
• CCB is a trademark of SANYO ELECTRIC CO., LTD.
• CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
101698RM (OT) No. 5913-1/10

1 page




LC75281 pdf
Block Diagram
LC75281E
Low band
Low mid band
High mid band
High band
The blocks enclosed in dotted
lines are identical.
No. 5913-5/10

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet LC75281.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LC75281Parametric Equalizer SystemSanyo Semicon Device
Sanyo Semicon Device
LC75281EParametric Equalizer SystemSanyo Semicon Device
Sanyo Semicon Device

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar