|
|
PDF LC74760M Data sheet ( Hoja de datos )
| Número de pieza | LC74760M | |
| Descripción | On-Screen Display IC | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC74760M (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Ordering number : EN4453A
CMOS IC
LC74760, 74760M
On-Screen Display IC
Overview
The LC74760 and LC74760M are on-screen display
CMOS ICs that superimpose text and low-level graphics
onto a TV screen (video signal) under microprocessor
control. The display characters have a 12 by 18 dot
structure, and 128 characters are provided. The display
area consists of 12 lines of 24 characters each.
Features
• Display structure: 12 lines by 24 characters (up to 288
characters)
• Number of displayed characters: Up to 288 characters
• Character configuration: 12 (W) by 18 (H) dot structure
• Character sizes: Three sizes (normal, double, and triple
sizes)
• Display starting positions: 64 horizontal and 64 vertical
locations
• Reverse video function: Characters can be inverted on a
per character basis.
• Flashing types: Two types with periods of 0.5 and 1.0
second on a per character basis (duty fixed at 50%)
• Background color: One of eight colors (when internal
synchronization used)
• External control input: Serial data input in 8-bit units
• Built-in horizontal/vertical sync separation circuit, AFC
circuit, and synchronization detector
• Video output: Composite video signal output in NTSC,
PAL, PAL-M, PAL-N, PAL60, NTSC4.43, or SECAM
format
Package Dimensions
unit: mm
3061-DIP30S
[LC74760]
unit: mm
3073A-MFP30S
[LC74760M]
SANYO:DIP30S
SANYO: MFP30S
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-0005 JAPAN
13096HA (OT)/73093JN (OT) No. 4453-1/14
1 page  
System Block Diagram
LC74760, 74760M
No. 4453-5/14
5 Page 
LC74760, 74760M
Second byte
DA0 to DA7
7
6
Register name
—
TST
State
0
0
1
Register content
Function
Second byte identification code
Normal operation
Test mode
0 Sets the character intensity level to about 95 IRE (bright white).
5
CHAL
1 Sets the character intensity level to about 75 IRE (white with a
touch of grey).
0 Sets the blanking intensity level to about 5 IRE (a deep black
as a frame level).
4 BKL
1 Sets the blanking intensity level to about 15 IRE (a dark grey
as a frame level).
0
RSL1
RSL0
Intensity level
Amplitude
3
RSL1
1
0
0
About 15 IRE
About 60 IRE
0
1
About 30 IRE
About 60 IRE
0
1
0
About 45 IRE
About 60 IRE
2 RSL0
1
1
1
About 60 IRE
About 69 IRE
1 —0
0 —0
Note: When the chip is reset by the RST pin, the register states (bits) are all cleared to 0.
Note
Test mode should not be used. This bit
should always be zero.
Switches the character intensity level.
Switches the blanking intensity level.
Switches the background intensity level.
7 COMMAND6: Display Control Setting Command 3
First byte
DA0 to DA7
7
6
5
4
3
2
1
0
Register name
—
—
—
—
MOD3
MOD2
MOD1
MOD0
State
1
1
1
0
0
1
0
1
0
1
0
1
Register content
Function
The command 6 identification code:
sets display control parameters.
Sets Fsc to 3.58 MHz.
Sets Fsc to 4.43 MHz.
Sets the color mode to NTSC.
Sets the color mode to PAL.
Sets the number of scan lines to 525 lines.
Sets the number of scan lines to 625 lines.
Sets the mode to a mode other than SECAM.
Sets the mode to SECAM mode.
Note
The logical or of this bit and the Fsc
switching input pin (pin 14) is used.
The logical or of this bit and the color
mode switching input pin (pin 13) is
used.
The logical or of this bit and the scan
line count switching input pin (pin 12) is
used.
The logical or of this bit and the mode
switching input pin (pin 11) is used.
No. 4453-11/14
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet LC74760M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC74760 | On-Screen Display IC | Sanyo Semicon Device |
| LC74760M | On-Screen Display IC | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |