|
|
Número de pieza | IP5020 | |
Descripción | Internet Access Server | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IP5020 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! IP5020
Internet Access Server
User’s Guide
www.DataSheet4U.com
P/N: 9590C50101
1 page &KDSWHU
,QWURGXFWLRQ
This Chapter provides an overview of the IP5020's features and
capabilities.
Congratulations on the purchase of your new IP5020 Internet Access Server.
The IP5020 will allow multiple LAN users to share an Internet user account, via
an DSL or Cable modem. Once the IP5020 is installed and configured, the
Internet is just a click away.
10/100BaseT LAN
Internet
A D S L /C a ble M o de m
Internet Access Server
Figure 1: Office to Internet
Alternatively, the IP5020 Internet Access Server can be used to connect your
local LAN to a remote LAN or WAN, via the IP5020's WAN port.
IP5020 Features
The IP5020 incorporates many advanced features, carefully designed to provide
sophisticated functions while being easy to use.
LAN Features
w• wwD.DuataalShEeteht4eUrn.ceotmports. The IP5020 has 2 Ethernet ports. One (the LAN
port) is used to connect to your local LAN. The other (the WAN port) is
used to connect to an external LAN, WAN or the Internet. (Internet access
requires an DSL or Cable modem.)
• DHCP Server Support. Dynamic Host Configuration Protocol provides a
dynamic IP address to PCs and other devices upon request. The IP5020 can
act as a DHCP Server for devices on your local LAN.
• DHCP Client Support. On the WAN port, the IP5020 can act as a DHCP
Client. This allows the use of dynamic IP Addresses on the "External LAN"
or WAN.
• Multi Segment LAN Support. LANs containing one or more segments
are supported, via the IP5020's built-in static routing table. If NAT (Network
Address Translation) is disabled, the IP5020 will function as a static router.
Internet Access Features
• Shared Internet Access. All users on the LAN can access the Internet
through the IP5020, using only a single external IP Address. The local (in-
valid) IP Addresses are hidden from external sources. This process is called
NAT (Network Address Translation).
1
5 Page &KDSWHU
&RQILJXUDWLRQ
This Chapter provides details of the configuration process.
Overview
This chapter describes the configuration and checking of the LAN and WAN
ports.
PCs on your local LAN may also require configuration. For details, see Chapter
4 - PC Configuration. Also, if you are using DHCP, please read Chapter 5 -
DHCP.
Other IP5020 configuration may also be required, depending on which features
and functions of the IP5020 you wish to use. Use the table below to locate
detailed instructions for the required functions.
To Do this:
Configure PCs on your internal LAN.
Refer to:
Chapter 4:
PC Configuration
Use DHCP on the internal LAN
Chapter 5:
DHCP
Configure the IP5020 and routers for a LAN
which has 1 or more routers.
Chapter 6:
Routing
Set a password for the IP5020, or disable NAT
(Network Address Translation).
Chapter 7:
Device Options
Use any of the following features:
• Special Internet Applications
• Virtual Servers
www.DataSheet4U.com
• Exposed Computer
Chapter 8:
Advanced Internet
Features
Limit Internet Access by individual workstations Chapter 9:
Access Control
Where use of a certain feature requires that PCs or other
LAN devices be configured, this is also explained in the
relevant chapter.
7
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet IP5020.PDF ] |
Número de pieza | Descripción | Fabricantes |
IP5020 | Internet Access Server | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |