DataSheet.es    


PDF DM4035 Data sheet ( Hoja de datos )

Número de pieza DM4035
Descripción 1:4 Power Splitter
Fabricantes Digimimic 
Logotipo Digimimic Logotipo



Hay una vista previa y un enlace de descarga de DM4035 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! DM4035 Hoja de datos, Descripción, Manual

Description
DM4035
1:4 Power Splitter
(preliminary information)
The DM4035 is an ultra wideband 1-to-4 active power splitter fabricated using a 0.1 mm HBT
GaAs technology. It is based on an ECL topology in order to guarantee high-speed
operations.
The device is capable of replicating NRZ streams with data rate up to 12.5Gb/s or clock
signal with frequency up to 12.5GHz.
The inputs and the outputs are DC coupled. At the input side the internal 50 ohm resistors
avoid the need for external impedance matching terminations. The DM4035 uses SCFL I/O
levels and is designed so to allow for either single ended or differential data input. is an ultra-
wideband phase delay fabricated using 1-um HBT GaAs technology and is based on ECL
topology to guarantee high-speed operation. The large output voltage, excellent rise and fall
time and the good quality of the eye diagram at all data rates up to 12.5Gb/s makes the
DM4035 suitable for data and clock distribution at a very high speed. Complex digital
applications may benefit from the DM4035: as an example clock and data distribution.
Features
Device Diagram
Ultra wideband: Up to 12.5 Gb/s NRZ
High Input sensitivity: 300mV single ended
900 mVpp single-ended output
Jitter RMS: <1.5 ps
Output rise time (20% – 80 %): <20 ps
Output fall time (20% – 80 %): <17 ps
50-ohm matched DC-coupled inputs and outputs
Differential or single ended I/O
Power consumption: 2.0 W
VEE
OUT1/ OUT1
60 Ohm
60 Ohm
OUT4/ OUT4
60 Ohm
60 Ohm
www.DataSheet4U.com
Timing Diagram
DIN
DIN/
50 Ohm
50 Ohm
iT4035
60 Ohm
60 Ohm
OUT2/ OUT2
60 Ohm
60 Ohm
OUT3/ OUT3
DIN
VIH
VIL
DOUTx
VOH
VOL
50%
TOH
50%
TOL
50%
TDH
50%
TDL
www.digimimic.com
Specifications are based on most current or latest revision.
October 27, 2007 Doc. 4035 Rev 1 1
Digimimic
via dell'Orsa Maggiore 21, 00144 Rome, Italy
Phone +39 (06) 5582904
+39 (06) 5587394

1 page




DM4035 pdf
Recommended
chip assembly
56te0xpt F
DM4035
1:4 Power Splitter
(preliminary information)
VEE
56te0xpt F
DIN
DIN/
GND
GND
GND
iT4035
1 uF
1 uF
www.DataSheet4U.com
1 uF
Disclaimer
DIGIMIMIC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR
DESIGN. DIGIMIMIC DOES NOT ASSUME ANY LIABILITY ARISING OUT O THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE
RIGHTS OF OTHERS.
www.digimimic.com
Specifications are based on most current or latest revision.
October 27, 2007 Doc. 4035 Rev 1 5
Digimimic
via dell'Orsa Maggiore 21, 00144 Rome, Italy
Phone +39 (06) 5582904
+39 (06) 5587394

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet DM4035.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DM40351:4 Power SplitterDigimimic
Digimimic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar