DataSheet.es    


PDF SMB17 Data sheet ( Hoja de datos )

Número de pieza SMB17
Descripción TVS Diode, SMD (Transient Voltage Suppressor)
Fabricantes MIC GROUP RECTIFIERS 
Logotipo MIC GROUP RECTIFIERS Logotipo



Hay una vista previa y un enlace de descarga de SMB17 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! SMB17 Hoja de datos, Descripción, Manual

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMB5.0 THRU SMB170CA
Stand-off Voltage
Peak Pulse Power
5.0 to 170 Volts
600 Watts
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Low incremental surge resistance
600W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 Volts to
V (BR) for unidirectional and 5.0ns for bidirectional types
For devices with V (BR) 10V, ID are typically ID less than 1.0μA
High temperature soldering guaranteed:
250/10 seconds at terminals
MECHANICAL DATA
DO-214AA(SMB)
Dimensions in inches and (millimeters)
Cass: JEDEC DO-214AA,molded plastic body over passivated junction
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color bands denotes positive end (cathode) except bidirectional
Mounting position: any
Weight: 0.003 ounces, 0.093 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
For bidirectional use C or CA suffix for types SMB-5.0 thru SMB-170 (e.g. SMBG5.0C,SMBJ170CA)
.Electrical Characteristics apply in both directions.
www.DaMtaSAheXet4IUM.cUomM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified
Ratings
Symbols
Value
Unit
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,2,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current, 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (Note2,3) unidirectional only
Maximum instantaneous forward voltage at 50A (NOTE 3,4)
unidirectional only (NOTE 3)
Operating Junction and Storage Temperature Range
PPPM Minimum 600 Watts
IPPM See Table 1 Amps
IFSM
100.0
Amps
VF SEE NOTE 4 Volts
TJ, TSTG
50 to +150
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25per Fig.2
2. Mounted on 0.2×0.2(5.0×5.0mm) copper pads to each terminal
3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum.
4. VF=3.5 V on SMB thru SMB-90 devices and VF=5.0V on SMB-100 thru SMB-170 devices
E-mail: [email protected] Web Site: www.cnmic.com

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet SMB17.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SMB10SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORSLite-On Technology
Lite-On Technology
SMB10TVS Diode, SMD (Transient Voltage Suppressor)MIC GROUP RECTIFIERS
MIC GROUP RECTIFIERS
SMB100SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORSLite-On Technology
Lite-On Technology
SMB100TVS Diode, SMD (Transient Voltage Suppressor)MIC GROUP RECTIFIERS
MIC GROUP RECTIFIERS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar