DataSheet.es    


PDF IQF-27L Data sheet ( Hoja de datos )

Número de pieza IQF-27L
Descripción I&Q NETWORKS
Fabricantes Merrimac Industries 
Logotipo Merrimac Industries Logotipo



Hay una vista previa y un enlace de descarga de IQF-27L (archivo pdf) en la parte inferior de esta página.


Total 1 Páginas

No Preview Available ! IQF-27L Hoja de datos, Descripción, Manual

IQF-27L Series
I&Q NETWORKS
20 to 200 MHz / In-Circuit Phase and Amplitude Adjustments / 10% Bandwidth / Hi-Rel Package
PRINCIPAL SPECIFICATIONS
Model
Number
LO Frequency
fo, MHz
Bandwidth
RF Input
IQF-27L-***B
20 - 200
10% of fo
For complete Model Number replace *** with desired LO Frequency in MHz.
General Notes:
1. I & Q networks are integrated devices that produce two
quadrature-phased, equal amplitude signals when fed RF and LO
signals.
2. The IQF-27L series features in-circuit, voltage controlled phase and
amplitude balance adjustments that allow fine adjustments when the
device is in its normal operating environment. These features provides
accuracy not previously attainable in a comparably small package. In
addition, the voltage controlled phase and amplitude balance inputs
facilitate closed loop, servo operation using the adjustment inputs in the
feedback loops.
3. Merrimac I & Q networks comply with the relevant sections of
MIL-M-28837 and may be supplied screened for compliance with
additional specifications for military and space applications requiring the
www.hDigahtaeSshtereetl4iaUb.ciloitmy.
L - Package Outline
GENERAL SPECIFICATIONS
RF and LO Input Characteristics
Impedance:
50 nom.
VSWR:
1.5:1 max.
RF Power Level: 0 dBm nom.
LO Power Level +10 dBm nom.
I & Q Output Characteristics
Video Bandwidth: DC to 50 MHz nom.
Output Impedance: 50 nom.
Conversion Loss
(RF to I or Q):
10 dB typ.,12 dB max.
IF Balance (I to Q) @ Vc = +5V
Phase:
90° ±
Amplitude:
0 ± 0.2 dB
Bias Controls, @ fo: 0 to +10V
Phase Tuning:
±5° nom.
Amplitude Range: ±1 dB nom.
Temperature Stability: ±0.2 dB, ±1° max.
Operating Temp:
-- 55° to +85°C
Weight, nominal:
0.55 oz (15.4 g)
RF and Video Bandwidths are typically much greater than specified.
NOTES:
1. Tolerance on 3 place decimals
±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked pins are case ground.
Phase Adjust
LO Input
I Output
Amplitude Adjust
RF Input
Q Output
29Apr96
ForfurtherinformationcontactM ERRIM AC /41FairfieldPl.,W estCaldw ell,NJ,07006 /973-575-1300 /FAX 973-575-0531

1 page





PáginasTotal 1 Páginas
PDF Descargar[ Datasheet IQF-27L.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IQF-27LI&Q NETWORKSMerrimac Industries
Merrimac Industries

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar