DataSheet.es    


PDF IQF-25L Data sheet ( Hoja de datos )

Número de pieza IQF-25L
Descripción I&Q NETWORKS
Fabricantes Merrimac Industries 
Logotipo Merrimac Industries Logotipo



Hay una vista previa y un enlace de descarga de IQF-25L (archivo pdf) en la parte inferior de esta página.


Total 1 Páginas

No Preview Available ! IQF-25L Hoja de datos, Descripción, Manual

IQF-25L Series
I&Q NETWORKS
1.5 to 3 GHz / 10 % Bandwidth / In-Circuit, Voltage Controlled Phase Balance / Hi-Rel Hermetic
Pkg
PRINCIPAL SPECIFICATIONS
Model
Number
LO Frequency, Bandwidth
fo, MHz
RF Input
IQF-25L-***B 1500 - 3000 10% of fo
For complete Model Number replace *** with desired LO Frequency in MHz.
www.DataSheet4U.com
NOTES:
1. Tolerance on 3 place decimals
±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked pins are case ground.
L - Package Outline
LO Input
Not Used
Phase Adjust
I Output
RF Input
Q Output
GENERAL SPECIFICATIONS
RF and LO Input Characteristics
Impedance:
50 nom.
VSWR:
1.5:1 max.
RF Power Level:
0 dBm nom.
LO Power Level:
+10 dBm nom.
I & Q Output Characteristics
Video Bandwidth, nom: DC to 100 MHz
Output Impedance: 50 nom.
Conversion Loss
(RF to I or Q):
10 dB typ.,
12 dB max.
IF Balance (I to Q)
Phase, @ Vc=+5V:
Bias Control:
90° ±
0 to +15V
Phase Tuning Range: ±10° nom., @ fo
Tuning Sensitivity:
4°/V nom.
Temperature Stability: ±1° nom.,±2° max.
Amplitude:
0.2 dB max.
Weight, nominal
0.55 oz (15.4 g)
Operating Temp:
-- 55° to +85°C
RF and Video Bandwidths are typically much greater than specified.
General Notes:
1. I & Q networks are integrated devices that produce two quadrature-phased, equal amplitude signals when fed RF and LO signals.
2. The IQF-25L series features an in-circuit, voltage controlled phase balance that allows fine adjustment of phase. This feature provides accuracy
not previously attainable in a comparably small package. In addition, the voltage controlled phase balance input facilitates closed loop, servo
operation using the phase adjustment input as feedback.
3. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional
specifications for military and space applications requiring the highest reliability.
24May96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531

1 page





PáginasTotal 1 Páginas
PDF Descargar[ Datasheet IQF-25L.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IQF-25FI&Q NETWORKSMerrimac Industries
Merrimac Industries
IQF-25LI&Q NETWORKSMerrimac Industries
Merrimac Industries

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar