|
|
PDF IQF-20L Data sheet ( Hoja de datos )
| Número de pieza | IQF-20L | |
| Descripción | I&Q NETWORKS | |
| Fabricantes | Merrimac Industries | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IQF-20L (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
IQF-20L Series
I&Q NETWORKS
3 to 6 GHz / Low Loss / Excellent Phase and Amplitude Balance / Hi-Rel Hermetic Package
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO
Frequency
fo , GHz
†I/Q Output
Bandwidth
MHz
IQF-20L-****B
3 to 6
DC - 150
For complete Model Number replace **** with desired LO Center Frequency in MHz
General Notes:
1. I & Q networks are integrated devices that produce two quadrature-phased,
equal amplitude signals when fed RF and LO signals.
2. Comprised of standard components, these units are optimized for high accuracy
at a specified LO frequency and maintain specified performance across a
bandwidth of 10% of the LO frequency.
3. I & Q networks can also be used in digital systems as a QPSK demodulator
where it recovers two data channels from the incoming phase information. The
QPSK input is applied to the RF port while the recovered carrier is applied to the
LO port resulting in the two independent data outputs at the I and Q data ports.
4. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837
and can be supplied screened for compliance with additional specifications for
military and space applications requiring the highest reliability.
www.DataSheet4U.com
L- Flatpack Outline
GENERAL SPECIFICATIONS
RF/LO Input Characteristics
†RF Bandwidth:
10% of fo
Impedance:
50 Ω nom.
VSWR:
2.0:1 max.
RF Power Level:
0 dBm max.
LO Power Level @ fo: +10 dBm nom.
I & Q Output Characteristics
Output Impedance:
Conversion Loss
50 Ω nom.
(RF to I or Q):
8 dB typ.,12 dB max.
IF Quadrature Bal.,(I to Q),@ 100 kHz IF
Phase (LO=fo):
Phase (LO=fo±5%):
Ampl. LO=fo):
Ampl. (LO=fo±5%):
Weight, nominal:
±2°nom., ±3°max.
±2°nom., ±5°max.
0.3 dB max.
0.5 dB max.
0.55 oz (15.4 g)
Operating Temp:
-- 55° to+ 85°C
†RF and Video Bandwidths are typically much greater than specified.
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Lead dimensions apply only at body.
4. All unmarked pins are case ground.
23Feb96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet IQF-20L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IQF-20E | I&Q NETWORKS | Merrimac Industries |
| IQF-20F | I&Q NETWORKS | Merrimac Industries |
| IQF-20L | I&Q NETWORKS | Merrimac Industries |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |