|
|
PDF TMP91FU62DFG Data sheet ( Hoja de datos )
| Número de pieza | TMP91FU62DFG | |
| Descripción | 16 Bit Microcontroller | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TMP91FU62DFG (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
16 Bit Microcontroller
TLCS-900/L1 Series
www.DataSheet4U.com
TMP91FU62FG
TMP91FU62DFG
Revision 1.1
TOSHIBA CORPORATION
1 page  
CMOS 16 Bit Microcontroller
TMP91FU62FG/DFG
TMP91FU62
Product No.
TMP91FU62FG
TMP91FU62DFG
ROM
(Flash ROM)
96K bytes
RAM
4K bytes
Package
LQFP80-P-1212-0.50E
QFP80-P-1420-0.80B
1.1 Features
• High-speed 16-bit CPU (900/L1 CPU)
- Instruction mnemonics are upward-compatible with TLCS-900,900/H,900/L
- 16 Mbytes of linear address space
- General-purpose registers and register banks
- 16-bit multiplication and division instructions; bit transfer and arithmetic instructions
- Micro DMA: 4 channels (800ns/2 bytes at 20MHz)
• Minimum instruction execution time:200ns (at 20MHz)
• Built-in memory
- ROM: 96K bytes (Flash ROM)
- RAM: 4K bytes
• 8-bit timers: 4 channels
• 16-bit timers: 4 channels
• General-purpose serial interface: 4 channels
- UART/Synchronous mode: 3 channels
- I2C bus mode: 1 channels
• 10-bit AD converter (Built-in Sample hold circuit): 16 channels
• Special timer for CLOCK
www.DataSheet4U.c•omWatchdog timer
• Program patch logic: 6 banks
This product uses the Super Flash® technology under the licence of Silicon Storage Technology, Inc. Super Flash® is registered trademark of Silicon Storage
Technology, Inc.
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when
utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations
in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equip-
ment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither
intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor failure of
which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments,
airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instru-
ments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's
own risk.
• The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or
sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by impli-
cation or otherwise under any patents or other rights of TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these
products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled sub-
stances. Toshiba assumes no liability for damage or losses occuuring as a result of noncompliance with applicable laws and regulations.
Page 1
2007-10-10
5 Page 
TMP91FU62
Table 1-1 Pin Names and Functions(2/3)
Pin
Name
P81
TB0IN1
INT6
P82
TB0OUT0
P83
TB0OUT1
P84
TB1IN0
INT7
P85
TB1IN1
INT8
P86
TB1OUT0
P87
TB1OUT1
P90
TXD0
RXD0
P91
RXD0
TXD0
P92
SCLK0
CTS0
P93
www.DataShTXeeDt14U.com
RXD1
P94
RXD1
TXD1
P95
SCLK1
CTS1
P96
XT1
P97
XT2
PA0
TB2IN0
INT1
PA1
TB2IN1
INT2
PA2
TB2OUT0
PA3
TB2OUT1
Pin
Number
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Input
/
Output
IO
I
I
IO
O
IO
O
IO
I
I
IO
I
I
IO
O
IO
O
IO
O
I
IO
I
O
IO
IO
I
IO
O
I
IO
I
O
IO
IO
I
IO
I
IO
O
IO
I
I
IO
I
I
IO
O
IO
O
Functions
Port 81: I/O port
16-bit timer 0 input 1:Timer B0 count/capture trigger Input 1
Interrupt Request Pin 6: Interrupt request on rising edge
Port 82: I/O port
16-bit timer 0 output 0: Timer B0 Output 0
Port 83: I/O port
16-bit timer 0 output 1: Timer B0 Output 1
Port 84: I/O port
16-bit timer 1 input 0:Timer B1 count/capture trigger Input 0
Interrupt Request Pin 7: Interrupt request pin with programmable rising edge / falling edge.
Port 85: I/O port
16-bit timer 1 input 1:Timer B1 count/capture trigger Input 1
Interrupt Request Pin 8: Interrupt request on rising edge
Port 86: I/O port
16-bit timer 1 output 0: Timer B1 Output 0
Port 87: I/O port
16-bit timer 1 output 1: Timer B1 Output 1
Port 90: I/O port
Serial Send Data 0
Serial Receive Data 0
Port 91: I/O port
Serial Receive Data 0
Serial Send Data 0
Port 92: I/O port
Serial Clock I/O 0
Serial Data Send Enable 0 (Clear to Send)
Port 93: I/O port
Serial Send Data 1
Serial Receive Data 1
Port 94: I/O port
Serial Receive Data 1
Serial Send Data 1
Port 95: I/O port
Serial Clock I/O 1
Serial Data Send Enable 1 (Clear to Send)
Port 96: I/O port
Low-frequency oscillator connection pin
Port 97: I/O port
Low-frequency oscillator connection pin
Port A0: I/O port
16-bit timer 2 input 0:Timer B2 count/capture trigger Input 0
Interrupt Request Pin 1: Interrupt request pin with programmable rising edge / falling edge.
Port A1: I/O port
16-bit timer 2 input 1:Timer B2 count/capture trigger Input 1
Interrupt Request Pin 2: Interrupt request on rising edge
Port A2: I/O port
16-bit timer 2 output 0: Timer B2 Output 0
Port A3: I/O port
16-bit timer 2 output 1: Timer B2 Output 1
Page 7
2007-10-10
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet TMP91FU62DFG.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TMP91FU62DFG | 16 Bit Microcontroller | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |