DataSheet.es    


PDF 7260QR2 Data sheet ( Hoja de datos )

Número de pieza 7260QR2
Descripción MMA7260QR2
Fabricantes Motorola Semiconductors 
Logotipo Motorola Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de 7260QR2 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! 7260QR2 Hoja de datos, Descripción, Manual

Freescale Semiconductor
Technical Data
±1.5g - 6g Three Axis Low-g
Micromachined Accelerometer
The MMA7260Q low cost capacitive micromachined accelerometer
features signal conditioning, a 1-pole low pass filter, temperature
compensation and g-Select which allows for the selection among 4
sensitivities. Zero-g offset full scale span and filter cut-off are factory set and
require no external devices. Includes a Sleep Mode that makes it ideal for
handheld battery powered electronics.
Features
• Selectable Sensitivity (1.5g/2g/4g/6g)
• Low Current Consumption: 500 µA
• Sleep Mode: 3 µA
• Low Voltage Operation: 2.2 V – 3.6 V
• 6mm x 6mm x 1.45mm QFN
• High Sensitivity (800 mV/g @1.5 g)
• Fast Turn On Time
• High Sensitivity (1.5 g)
• Integral Signal Conditioning with Low Pass Filter
• Robust Design, High Shocks Survivability
• Pb-Free Terminations
• Environmentally Preferred Package
• Low Cost
Typical Applications
• HDD MP3 Player : Freefall Detection
• Laptop PC : Freefall Detection, Anti-Theft
• Cell Phone : Image Stability, Text Scroll, Motion Dialing, E-Compass
www.DataSPheeedto4mU.ecotemr : Motion Sensing
• PDA : Text Scroll
• Navigation and Dead Reckoning : E-Compass Tilt Compensation
• Gaming : Tilt and Motion Sensing, Event Recorder
• Robotics : Motion Sensing
Device Name
MMA7260Q
MMA7260QR2
ORDERING INFORMATION
Temperture Range Case No.
Package
– 20 to +85°C
1622-01
QFN-16, Tube
– 20 to +85°C
1622-01
QFN-16,Tape & Reel
MMA7260Q
Rev 0, 04/2005
MMA7260Q
MMA7260Q: XYZ AXIS
ACCELEROMETER
± 1.5g/2g/4g/6g
Bottom View
16 LEAD
QFN
CASE 1622-01
Top View
16 15 14 13
g-Select1 1
12
Sleep
Mode
g-Select2 2
11 N/C
VDD 3
10 N/C
VSS 4
9 N/C
5678
Figure 1. Pin Connections
© Freescale Semiconductor, Inc., 2005. All rights reserved.

1 page




7260QR2 pdf
BASIC CONNECTIONS
Pin Descriptions
Top View
PCB Layout
POWER SUPPLY
g-Select1 1
g-Select2 2
VDD 3
VSS 4
16 15
56
14 13
12 Sleep Mode
11 NC
10 NC
9 NC
78
Figure 4. Pinout Description
Table 4. Pin Descriptions
Pin No.
1
2
3
4
5-7
Pin Name
g-Select1
g-Select2
VDD
VSS
N/C
8 - 11
N/C
12 Sleep Mode
13 ZOUT
14 YOUT
15 XOUT
16 N/C
www.DataSheet4U.com
Description
Logic input pin to select g level.
Logic input pin to select g level.
Power Supply Input
Power Supply Ground
No internal connection.
Leave unconnected.
Unused for factory trim.
Leave unconnected.
Logic input pin to enable product or
Sleep Mode.
Z direction output voltage.
Y direction output voltage.
X direction output voltage.
No internal connection.
Leave unconnected.
Logic
Inputs
VDD
0.1 µF
Logic
Input
1 g-Select1
ZOUT 13 1 k
2 g-Select2
0.1 µF
MMA7260Q
3 VDD
YOUT 14
1 k
4 VSS
12 Sleep Mode
0.1 µF
XOUT 15 1 k
0.1 µF
Figure 5. Accelerometer with Recommended
Connection Diagram
VDD
VSS
Sleep Mode
g-Select1
C
C VRH
P0
P1
g-Select2
P2
XOUT
YOUT
ZOUT
R
C
R
C
R
C
A/DIN
A/DIN
A/DIN
VDD
C
VSS
Figure 6Recommended PCB Layout for Interfacing
Accelerometer to Microcontroller
NOTES:
1. Use 0.1 µF capacitor on VDD to decouple the power
source.
2. Physical coupling distance of the accelerometer to
the microcontroller should be minimal.
3. Flag underneath package is connected to ground.
4. Place a ground plane beneath the accelerometer to
reduce noise, the ground plane should be attached to
all of the open ended terminals shown in Figure 6.
5. Use an RC filter with 1.0 kand 0.1 µF on the
outputs of the accelerometer to minimize clock noise
(from the switched capacitor filter circuit).
6. PCB layout of power and ground should not couple
power supply noise.
7. Accelerometer and microcontroller should not be a
high current path.
8. A/D sampling rate and any external power supply
switching frequency should be selected such that
they do not interfere with the internal accelerometer
sampling frequency (11 kHz for the sampling
frequency). This will prevent aliasing errors.
Sensors
Freescale Semiconductor
MMA7260Q
2-5

5 Page





7260QR2 arduino
NOTES
www.DataSheet4U.com
Sensors
Freescale Semiconductor
MMA7260Q
2-11

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet 7260QR2.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
7260QR2 MMA7260QR2Motorola Semiconductors
Motorola Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar