|
|
PDF IL440 Data sheet ( Hoja de datos )
| Número de pieza | IL440 | |
| Descripción | Optocoupler | |
| Fabricantes | Vishay Siliconix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IL440 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
VISHAY
IL440
Vishay Semiconductors
Optocoupler, Phototriac Output, Low Input Current
Features
• 400 and 600 V Blocking Voltage
• 5.0 mA Maximum Trigger Current
• Isolation Test Voltage, 5300 VRMS, t = 1.0 sec.
• Isolation Materials per UL94
• Pin Compatible with Optocouplers
IL440-1 MOC 3051
IL440-2 MOC 3052
IL440-3 MOC3053
IL440-4 MOC 3021
IL440-5 MOC 3022
IL440-6 MOC 3023
• Lead-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J,
Double Protection
• CSA 93751
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
• BABT/ BSI IEC60950 IEC60065
Applications
High Current Triac Driver
www.DataSheet4U.com
Solid State Relay
Switch Small AC Loads
Description
The IL440 consists of a GaAs infrared emitter opti-
cally coupled to a silicon planar triac chip with a non-
zero crossing network. The two semiconductors are
assembled in a 6 pin dual-in-line plastic package. The
output detector IL440-1, 2, 3 is capable of blocking up
to 600 volts which permits control of off-line voltages
up to 240 VAC. The IL440 can handle currents up to
100 mA RMS.
A1
C2
NC 3
6 MT2
5 NC
4 MT1
e3 Pbi179035
Pb-free
Order Information
Part
IL440-1
IL440-2
IL440-3
IL440-4
IL440-5
IL440-6
IL440-1X009
IL440-2X006
IL440-3X007
IL440-3X009
IL440-4X007
IL440-4X009
IL440-5X006
IL440-5X009
IL440-6X006
IL440-6X007
IL440-6X009
Remarks
15 mA IFT, 600 V VDRM, DIP-6
10 mA IFT, 600 V VDRM, DIP-6
5.0 mA IFT, 600 V VDRM, DIP-6
15 mA IFT, 400 V VDRM, DIP-6
10 mA IFT, 400 V VDRM, DIP-6
5.0 mA IFT, 400 V VDRM, DIP-6
15 mA IFT, 600 V VDRM, SMD-6 (option 9)
10 mA IFT, 600 V VDRM, DIP-6 400 mil
(option 6)
5.0 mA IFT, 600 V VDRM, SMD-6 (option 7)
5.0 mA IFT, 600 V VDRM, SMD-6 (option 9)
15 mA IFT, 400 V VDRM, SMD-6 (option 7)
15 mA IFT, 400 V VDRM, SMD-6 (option 9)
10 mA IFT, 400 V VDRM, DIP-6 400 mil
(option 6)
10 mA IFT, 400 V VDRM, SMD-6 (option 9)
5.0 mA IFT, 400 V VDRM, DIP-6 400 mil
(option 6)
5.0 mA IFT, 400 V VDRM, SMD-6 (option 7)
5.0 mA IFT, 400 V VDRM, SMD-6 (option 9)
For additional information on the available options refer to
Option Information.
Document Number 83631
Rev. 1.5, 26-Oct-04
www.vishay.com
1
1 page  
VISHAY
IL440
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
www.DataSheet4U.coumnintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
Document Number 83631
Rev. 1.5, 26-Oct-04
www.vishay.com
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet IL440.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IL440 | TRIAC PREDRIVER NON-ZERO CROSSING OPTOCOUPLER |  Siemens Semiconductor Group |
| IL440 | Optocoupler | Vishay Siliconix |
| IL44608N | External Components Reliable and Flexible SMPS Controller |  IK Semicon |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |